SN74CBTK6800PW
| Parameters | |
|---|---|
| Type | Bus Switch |
| Resistance | 20Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBTK6800 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Circuit | 10 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 20μA |
| Output Current | 64mA |
| Number of Bits | 10 |
| Propagation Delay | 250 ps |
| Quiescent Current | 20μA |
| Turn On Delay Time | 6 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CBTK |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
SN74CBTK6800PW Overview
This is a relatively small item of digital switch that is included in the 24-TSSOP (0.173, 4.40mm Width) in order to save space on the board.Tube is the method used for packaging.In terms of mounting, digital switch ic uses the method of Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.When digital controlled switch operates at 4.5V~5.5V, designers are provided with a greater degree of flexibility.These multiplexers are members of the 74CBTK series, which provide extensive application potential.This configuration includes 24 terminations as part of its basic functionality.You can also find related parts by using its logic switch base part number of 74CBTK6800.For multiplexer's system, 5V voltage is supplied.There are 24 component pins in this turn signal switch.As a result, conductors end at GULL WING.Single is used as its supply type.It is configured with 24 pins.It is mounted in the way of Surface Mount.There is a family of CBT/FST/QS/5C/B members.As a result, signal multiplexer provides a total of 10 bits.Keeping the minimum supply voltage (Vsup) at 4V prevents some unnecessary failures.In order for 5V to operate normally, a power supply is provided.Bus Driver/Transceivers is the classification for this the digital switch ic.There are no external influences on this multiplexer ic, so it consumes 20μA current.Supply voltages of 5V can provide reliable performance of the multiplexers.The resistance is 2.With a resistance of 20Ohm, it operates.In order to provide greater switches' flexibility, 64mA is provided as the output current.
SN74CBTK6800PW Features
Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTK6800PW Applications
There are a lot of Texas Instruments SN74CBTK6800PW Signal Switches / Multiplexers / Decoders applications.
- Electronically controlled engine system
- Recording transmission
- Code converters
- Logic circuits
- Enabling different functions units in microprocessor instruction decoding
- Medium scale TV wall
- Make full adder
- RF-based home automation system
- Video transmission
- Analog to digital conversion
