SN74CBTLV16210DL
| Parameters | |
|---|---|
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.01mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74CBTLV16210 |
| Pin Count | 48 |
| Circuit | 10 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Nominal Supply Current | 10μA |
| Output Current | 64mA |
| Number of Bits | 20 |
| Propagation Delay | 250 ps |
| Quiescent Current | 10μA |
| Turn On Delay Time | 7.4 ns |
SN74CBTLV16210DL Overview
It is included in the 48-BSSOP (0.295, 7.50mm Width) in order to save board space.As a result, it is packaged in a way that is referred to as Tube.Mounting is performed using Surface Mount.The analog IC in the multiplexers is identified as Bus Switch.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility using digital controlled switch when it works with 2.3V~3.6V voltage.Multiplexers of the 74CBTLV series can be used in a wide range of applications.Its basic configuration includes terminations in the 48 range.The base part number is 74CBTLV16210, so you can find its logic switch related parts using that number.For multiplexer's system, a voltage of 2.5V is supplied.Signal switch has 48 component pins.A conductor terminates at GULL WING.As a type of supply, Single is employed.Currently, it is configured with 48 pins.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the CBTLV/3B family.There are 20 bits signal multiplexer provides.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.In the absence of external influences, it consumes 10μA current of multiplexer ic.This signal switching operates at a resistance of 2.With a resistance of 7Ohm, it operates.For increased switches' flexibility, the output current of 64mA is provided.
SN74CBTLV16210DL Features
Supplied in the 48-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
SN74CBTLV16210DL Applications
There are a lot of Texas Instruments SN74CBTLV16210DL Signal Switches / Multiplexers / Decoders applications.
- Code converters
- War field flying robot with a night vision flying camera
- Microprocessor input/output systems
- Microprocessor instruction decoding
- Steel plants
- Used to connect a single source to multiple destinations
- Electronics industry
- Logic circuits
- PCIe
- A robotic vehicle with the metal detector
