Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
48-BSSOP (0.295, 7.50mm Width) |
Number of Pins |
48 |
Weight |
600.301152mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74CBTLV |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
48 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
7Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2.3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.635mm |
Base Part Number |
74CBTLV16210 |
Pin Count |
48 |
Circuit |
10 x 1:1 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
3.6V |
Number of Ports |
2 |
Nominal Supply Current |
10μA |
Output Current |
64mA |
Number of Bits |
20 |
Throw Configuration |
SPST |
Propagation Delay |
250 ps |
Quiescent Current |
10μA |
Turn On Delay Time |
7.4 ns |
Family |
CBTLV/3B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.01mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
2 |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
2.79mm |
Length |
15.88mm |
Width |
7.49mm |
Thickness |
2.59mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBTLV16210DLR Overview
In order to save board space, digital switch is located in the 48-BSSOP (0.295, 7.50mm Width).As a result, it is packaged in a way that is referred to as Cut Tape (CT).As far as mounting is concerned, digital switch ic uses Surface Mount.As the analog part, the circuit uses an analog IC Bus Switch.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Design engineers have more flexibility when digital controlled switch operates at 2.3V~3.6V voltage.These multiplexers are members of the 74CBTLV series, which provide extensive application potential.The basic configuration of this system includes 48 terminations.The base part number is 74CBTLV16210, so you can find its logic switch related parts using that number.The turn signal switch is supplied with a voltage of 2.5V volts.This turn signal switch has 48 component pins.As a result, GULL WING represents the end of the conductors.There is a type of supply Single that is employed in this case.It is configured with 48 pins.The mounting point is Surface Mount.Among the family of CBTLV/3B the logic switch is a member.As a result, signal multiplexer provides 20 bits.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.Bus Driver/Transceivers is a category for the digital switch ics.It consumes 10μA current of multiplexer ic since it is not affected by external factors.The signal switching is packaged by TR. A resistance of 2 is used to operate the signal switching.It operates with a resistance of 7Ohm.It is possible to provide a current output of 64mA for greater switches' flexibility.
SN74CBTLV16210DLR Features
Supplied in the 48-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
SN74CBTLV16210DLR Applications
There are a lot of Texas Instruments SN74CBTLV16210DLR Signal Switches / Multiplexers / Decoders applications.
- Injectors
- Logic gates for other digital devices
- War field flying robot with a night vision flying camera
- Automatic Monitoring systems
- To select different devices in microprocessor output
- Control unit of Central Processing unit (CPU)
- Microprocessor input/output systems
- Transmission from the computer system of a satellite
- Image transmission
- Combinational circuit