SN74CBTLV16210VR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 48 |
| Weight | 123.490523mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74CBTLV16210 |
| Pin Count | 48 |
| Circuit | 10 x 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Nominal Supply Current | 10μA |
| Output Current | 64mA |
| Number of Bits | 20 |
| Throw Configuration | SPST |
| Propagation Delay | 7.4 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 7.4 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.01mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTLV16210VR Overview
Providing this information in the 48-TFSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.Tape & Reel (TR) is the packaging method.Surface Mount is the mounting method digital switch ic uses.In the multiplexers, the analog IC Bus Switch is used.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Using a 2.3V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.Multiplexers in the 74CBTLV series are suitable for a wide range of applications.The basic configuration includes 48 terminations.The base part number is 74CBTLV16210, which can also be used to find its logic switch related parts.The turn signal switch is supplied with a voltage of 2.5V volts.Currently, this turn signal switch has a total of 48 component pins.As the end of conductors, it uses GULL WING.Its supply type is Single, which is used as the source of power.This multiplexer ic has 48 pins configured.Surface Mount is the way it is mounted.There is a family of CBTLV/3B members.As a result, signal multiplexer provides a total of 20 bits.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceiver.In the absence of external influences, it consumes 10μA current of multiplexer ic.The switches is packaged according to the way of TR.The system operates with a resistance of 2.With a resistance of 7Ohm, it operates.64mA provides a high degree of switches' flexibility.
SN74CBTLV16210VR Features
Supplied in the 48-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
SN74CBTLV16210VR Applications
There are a lot of Texas Instruments SN74CBTLV16210VR Signal Switches / Multiplexers / Decoders applications.
- Microprocessor input/output systems
- Robotic vehicles
- Microprocessor memory systems
- Data collection system
- Decimal decoder
- Electronic circuits
- To select different devices in microprocessor input
- RF-based home automation system
- Solenoid cooling fan
- GLAN
