SN74CBTLV16211DL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 4Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74CBTLV16211 |
| Pin Count | 56 |
| Circuit | 12 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Nominal Supply Current | 10μA |
| Output Current | 64mA |
| Number of Bits | 24 |
| Propagation Delay | 250 ps |
| Quiescent Current | 10μA |
| Turn On Delay Time | 7.7 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Nominal Input Voltage | 1.7V |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.01mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 2.79mm |
| Length | 18.41mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTLV16211DL Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 56-BSSOP (0.295, 7.50mm Width).Tube is the method used for packaging.Surface Mount is the mounting method digital switch ic uses.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 2.3V~3.6V, designers have superior flexibility.As a member of 74CBTLV series, the multiplexers can be used for a wide range of applications.Among its basic features are 56 terminations.There is a base part number of 74CBTLV16211 which can also be used in order to locate the logic switch that are related to this item.In this case, 2.5V is the voltage supplied to the multiplexer's system.This turn signal switch has a total of 56 component pins.As a result, GULL WING represents the end of the conductors.In this case, the supply type is Single.A configuration of 56 pins is used.This unit is mounted in the way of Surface Mount.The logic switch is a member of the family of CBTLV/3B.Signal multiplexer contains 24 bits.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V in order to prevent some unnecessary failures.The part belongs to the Bus Driver/Transceiver category of signal switches.Despite not interacting with external factors, it consumes 10μA current of multiplexer ic.A resistance of 2 is used to operate the signal switching.The resistance of the signal switching is 4Ohm.There is an output current of 64mA that allows for greater switches' flexibility.
SN74CBTLV16211DL Features
Supplied in the 56-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
SN74CBTLV16211DL Applications
There are a lot of Texas Instruments SN74CBTLV16211DL Signal Switches / Multiplexers / Decoders applications.
- LVDS
- Data transfer
- Data distribution
- High-performance memory-decoding applications
- Code conversion
- Steel plants
- Microprocessor input/output systems
- Home automation system
- Medical industry
- Telephone network
