SN74CBTLV16211DLR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 4Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74CBTLV16211 |
| Pin Count | 56 |
| Circuit | 12 x 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Nominal Supply Current | 10μA |
| Output Current | 64mA |
| Number of Bits | 24 |
| Throw Configuration | SPST |
| Propagation Delay | 7.7 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 7.7 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.01mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 2.79mm |
| Length | 18.41mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTLV16211DLR Overview
For the purpose of saving board space, digital switch is included in the 56-BSSOP (0.295, 7.50mm Width).In this case, it is packaged as Cut Tape (CT).Surface Mount is the mounting method digital switch ic uses.Bus Switch is the analog IC that the multiplexers uses.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 2.3V~3.6V.provides digital controlled switch's digital controlled switch'sAs a member of 74CBTLV series, the multiplexers can be used for a wide range of applications.This configuration includes 56 terminations as part of its basic functionality.The part number for 74CBTLV16211 can be used to find its logic switch related parts as well.In multiplexer's system, 2.5V is the voltage supplied.In this turn signal switch, there are 56 component pins.As a result, GULL WING represents the end of the conductors.There is a type of supply of Single.A total of 56 pins are configured on this board.The mount is in Surface Mount.The logic switch is a member of the CBTLV/3B family.There are 24 bits in signal multiplexer.It is advisable that the maximal supply voltage (Vsup) remains at 3.6V to avoid some unnecessary failures.In electronic terms, the digital switch ic is classified as Bus Driver/Transceiver.Not being affected by the external factors, consumes 10μA current of multiplexer ic.The signal switching is packaged by TR. The resistance is 2.A resistance of 4Ohm is used to operate it.Higher switches' flexibility is provided by providing 64mA as the output current.
SN74CBTLV16211DLR Features
Supplied in the 56-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
SN74CBTLV16211DLR Applications
There are a lot of Texas Instruments SN74CBTLV16211DLR Signal Switches / Multiplexers / Decoders applications.
- Computer memory
- HDMI applications
- Medical industry
- Night vision cameras
- Seven segment displays
- Steel plants
- Telephone network
- Microprocessor memory systems
- Image transmission
- Data-routing applications
