SN74CBTLV16211GR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 252.792698mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 4Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74CBTLV16211 |
| Pin Count | 56 |
| Circuit | 12 x 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Output Current | 64mA |
| Max Supply Current | 10μA |
| Number of Bits | 24 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 10μA |
| Turn On Delay Time | 7.7 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.01mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTLV16211GR Overview
It is included in the 56-TFSOP (0.240, 6.10mm Width) in order to save board space.The package is packaged in accordance with Cut Tape (CT).In terms of mounting, digital switch ic uses the method of Surface Mount.In the multiplexers, the analog IC Bus Switch is used.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.When digital controlled switch operates at 2.3V~3.6V, designers are provided with a greater degree of flexibility.Multiplexers in the 74CBTLV series are suitable for a wide range of applications.There are 56 terminations included in its basic configuration.You can also find related parts by using its logic switch base part number of 74CBTLV16211.For multiplexer's system, 2.5V voltage is supplied.This turn signal switch has 56 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.In this case, Single is employed as the supply type.With 56 pins, it is configured.The mounting is in the way of Surface Mount.The logic switch object belongs to the family of CBTLV/3B.Signal multiplexer provides 24 bits.Avoid unnecessary failures by keeping Vsup at 3.6V.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.Despite not interacting with external factors, it consumes 10μA current of multiplexer ic.According to TR, the switches is packaged.This signal switching operates at a resistance of 2.With a resistance of 4Ohm, it operates.For increased switches' flexibility, the output current of 64mA is provided.
SN74CBTLV16211GR Features
Supplied in the 56-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
SN74CBTLV16211GR Applications
There are a lot of Texas Instruments SN74CBTLV16211GR Signal Switches / Multiplexers / Decoders applications.
- To select different devices in microprocessor output
- Memory chips
- Data communication
- Electronic circuits
- Relay
- Microprocessor instruction decoding
- HDMI applications
- Logic circuits
- Data collection system
- Microprocessor input/output systems
