Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
56-BSSOP (0.295, 7.50mm Width) |
Number of Pins |
56 |
Weight |
694.790113mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CBTLV |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
56 |
ECCN Code |
EAR99 |
Type |
Bus FET Exchange Switch |
Resistance |
27Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
TTL COMPATIBLE BUS SWITCH |
Subcategory |
Other Logic ICs |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2.3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.635mm |
Base Part Number |
74CBTLV16212 |
Pin Count |
56 |
Circuit |
12 x 2:2 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
2.5/3.3V |
Supply Voltage-Min (Vsup) |
2.3V |
Number of Ports |
4 |
Output Current |
64mA |
Number of Bits |
24 |
Throw Configuration |
DPDT |
Propagation Delay |
250 ps |
Quiescent Current |
10μA |
Turn On Delay Time |
11.1 ns |
Family |
CBTLV/3B |
Number of Inputs |
24 |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
Nominal Input Voltage |
1.7V |
Prop. Delay@Nom-Sup |
0.25 ns |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
2.79mm |
Length |
18.41mm |
Width |
7.49mm |
Thickness |
2.59mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBTLV16212DLR Overview
Due to the lack of space on the board, digital switch is provided in the 56-BSSOP (0.295, 7.50mm Width).The package is in the form of Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.Bus FET Exchange Switch is the analog IC that the multiplexers uses.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.When digital controlled switch operates at 2.3V~3.6V, designers are provided with a greater degree of flexibility.The multiplexers from 74CBTLV series can be used for a wide range of applications.Among its basic configurations are 56 terminations.There is a base part number 74CBTLV16212 that can be used to locate signal switch's related components as well.The turn signal switch is supplied with a voltage of 2.5V volts.A component pin count of 56 can be found on this turn signal switch.It is the end of conductors that is represented by GULL WING.In this case, the supply type is Single.There are 56 pins on it.As you can see, it is mounted in the direction of Surface Mount.The logic switch belongs to the family of CBTLV/3B.Signal multiplexer consists of 24 bits.Keep Vsup at 2.3V to avoid unnecessary failures.The maximal supply voltage (Vsup) should be kept at 3.6V to avoid some unnecessary failures.For mux switch's normal operation, there is a power supply provided at 2.5/3.3V.Other Logic ICs is a category for the digital switch ics.There are no external influences on this multiplexer ic, so it consumes 10μA current.This multiplexer has 24 inputs.In accordance with TR, switches can be packaged.This signal switching operates at a resistance of 4.A resistance of 27Ohm is used to operate it.Additionally, TTL COMPATIBLE BUS SWITCH provides improved characteristics.For increased switches' flexibility, the output current of 64mA is provided.
SN74CBTLV16212DLR Features
Supplied in the 56-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
TTL COMPATIBLE BUS SWITCH
SN74CBTLV16212DLR Applications
There are a lot of Texas Instruments SN74CBTLV16212DLR Signal Switches / Multiplexers / Decoders applications.
- Frequency multiplexing system
- Microprocessor memory systems
- Make half adder
- Data collection system
- D/A converters
- Arithmetic Logic Units
- Injectors
- Automatic Monitoring systems
- Communication system
- Audio transmission