Parameters |
Quiescent Current |
10μA |
Turn On Delay Time |
250 ps |
Family |
CBTLV/3B |
Number of Inputs |
24 |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
Address Bus Width |
12b |
Prop. Delay@Nom-Sup |
0.25 ns |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
1.2mm |
Length |
14mm |
Width |
6.1mm |
Thickness |
1.15mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
56-TFSOP (0.240, 6.10mm Width) |
Number of Pins |
56 |
Weight |
252.792698mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74CBTLV |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
56 |
ECCN Code |
EAR99 |
Type |
Bus FET Exchange Switch |
Resistance |
27Ohm |
Subcategory |
Other Logic ICs |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2.3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.5mm |
Base Part Number |
74CBTLV16212 |
Pin Count |
56 |
Circuit |
12 x 2:2 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
2.5/3.3V |
Supply Voltage-Min (Vsup) |
2.3V |
Number of Ports |
4 |
Nominal Supply Current |
250mA |
Output Current |
64mA |
Number of Bits |
24 |
Throw Configuration |
DPDT |
Propagation Delay |
11.1 ns |
SN74CBTLV16212GR Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 56-TFSOP (0.240, 6.10mm Width).The package is packaged in the manner of Cut Tape (CT).In terms of mounting, digital switch ic uses the Surface Mount method .In the multiplexers, the analog IC Bus FET Exchange Switch is used.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 2.3V~3.6V, designers have superior flexibility.The multiplexers from 74CBTLV series can be used for a wide range of applications.There are 56 terminations included in its basic configuration.The base part number is 74CBTLV16212, so you can find its logic switch related parts using that number.The multiplexer's system is powered by 2.5V voltage.This turn signal switch consists of 56 component pins.It is the end of conductors that is represented by GULL WING.There is a supply type of Single employed as part of this supply.This multiplexer ic is configured with 56 pins.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the CBTLV/3B family.There are 24 bits in signal multiplexer.Keep Vsup at 2.3V to avoid unnecessary failures.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.During mux switch's normal operation, 2.5/3.3V is provided with a power supply.Part number Other Logic ICs indicates that the digital switch ic is an electronic part.In the absence of external influences, it consumes 10μA current of multiplexer ic.It has 24 inputs.The signal switching is packaged by TR. 4 ports are used for some other peripheral signal switchings to plug in.A resistance of 27Ohm is used to operate the signal switching.It is possible to provide a current output of 64mA for greater switches' flexibility.
SN74CBTLV16212GR Features
Supplied in the 56-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
SN74CBTLV16212GR Applications
There are a lot of Texas Instruments SN74CBTLV16212GR Signal Switches / Multiplexers / Decoders applications.
- Idle motor
- War field flying robot with a night vision flying camera
- Transmission from the computer system of a satellite
- Memory chips
- Speed control of medern motors
- Decimal decoder
- PCIe
- Automatic Monitoring systems
- Injectors
- Data communication