SN74CBTLV16292GR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 252.792698mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 40Ohm |
| Subcategory | Other Logic ICs |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 12 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74CBTLV16292 |
| Pin Count | 56 |
| Number of Outputs | 2 |
| Circuit | 12 x 1:2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Operating Supply Current | 10μA |
| Number of Bits | 12 |
| Throw Configuration | SPDT |
| Propagation Delay | 7.1 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 7.1 ns |
| Family | CBTLV/3B |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 24 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTLV16292GR Overview
This is a relatively small item of digital switch that is included in the 56-TFSOP (0.240, 6.10mm Width) in order to save space on the board.The package is in the form of Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .The analog IC used in the multiplexers can be referred to as Multiplexer/Demultiplexer.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 2.3V~3.6V, designers are provided with a greater degree of flexibility.The multiplexers from 74CBTLV series can be used for a wide range of applications.Its basic configuration includes terminations in the 56 range.You can also find related parts by using its logic switch base part number of 74CBTLV16292.In this case, 2.5V is the voltage supplied to the multiplexer's system.Currently, this turn signal switch has a total of 56 component pins.As the end of conductors, it uses GULL WING.There is a supply type of Single employed as part of this supply.Currently, it is configured with a 56 pin configuration.The mount is in Surface Mount.Among the family of CBTLV/3B the logic switch is a member.In the signal multiplexer, there are 12 bits available.Keeping the minimum supply voltage (Vsup) at 2.3V prevents some unnecessary failures.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.6V.Normally, 2.5/3.3V is powered by a battery.The turn signal switch has 2 outputs designed for operation.In electronic terms, the digital switch ic is classified as part number Other Logic ICs.Without external influences, it consumes 10μA current of multiplexer ic.The multiplexer provides 24 inputs.TR is used to package the switches.As far as the resistance is concerned, it operates with 40Ohm.When the load is supplied with a voltage of 10μA, stability of the multiplexers can be maintained.
SN74CBTLV16292GR Features
Supplied in the 56-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
Operating with the supply current of 10μA
SN74CBTLV16292GR Applications
There are a lot of Texas Instruments SN74CBTLV16292GR Signal Switches / Multiplexers / Decoders applications.
- Data-routing applications
- Enabling different rows of memory depending on address in memory chips
- RF-based home automation system
- Memory chips
- A/D converters
- Data demultiplexing
- War field flying robot with a night vision flying camera
- Solenoid cooling fan
- Microprocessor memory systems
- Control unit of Central Processing unit (CPU)
