Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
56-TFSOP (0.173, 4.40mm Width) |
Number of Pins |
56 |
Weight |
145.007811mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74CBTLV |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
56 |
ECCN Code |
EAR99 |
Type |
Multiplexer/Demultiplexer |
Resistance |
40Ohm |
Subcategory |
Other Logic ICs |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2.3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
12 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.4mm |
Base Part Number |
74CBTLV16292 |
Pin Count |
5 |
Number of Outputs |
2 |
Circuit |
12 x 1:2 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
2.5/3.3V |
Supply Voltage-Min (Vsup) |
2.3V |
Operating Supply Current |
10μA |
Number of Bits |
12 |
Throw Configuration |
SPDT |
Propagation Delay |
250 ps |
Quiescent Current |
10μA |
Turn On Delay Time |
7.1 ns |
Family |
CBTLV/3B |
Logic Function |
Demultiplexer, Multiplexer |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Height |
1.2mm |
Length |
11.3mm |
Width |
4.4mm |
Thickness |
1.05mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBTLV16292VR Overview
In order to save board space, digital switch is located in the 56-TFSOP (0.173, 4.40mm Width).Cut Tape (CT) is the packaging method.Mounting is performed using Surface Mount.The analog IC used in the multiplexers can be referred to as Multiplexer/Demultiplexer.The operating temperature of -40°C~85°C will not be susceptible to external factors.A supply voltage of 2.3V~3.6V provides digital controlled switch's superior flexibility for designers.Several applications are possible for 74CBTLV series multiplexers.It is designed with 56 terminations as part of its basic configuration.The base part number is 74CBTLV16292, which can also be used to find its logic switch related parts.In this case, 2.5V is the voltage supplied to the multiplexer's system.In this turn signal switch, there are 5 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.Single is employed as its supply type.Currently, it is configured with a 56 pin configuration.The mount is in Surface Mount.The logic switch is included into the family of CBTLV/3B.Signal multiplexer consists of 12 bits.To avoid unnecessary failures, keep the supply voltage at 2.3V (Vsup).It is advisable to keep the maximum supply voltage (Vsup) at 3.6V in order to prevent some unnecessary failures.During mux switch's normal operation, 2.5/3.3V is provided with a power supply.There are 2 outputs designed to operate the turn signal switch.Part number Other Logic ICs indicates that the digital switch ic is an electronic part.Despite not interacting with external factors, it consumes 10μA current of multiplexer ic.The switches package is packaged in accordance with the TR method.40Ohm is the resistance at which it operates.In a load with a supply voltage of 10μA, stability of the multiplexers can be maintained.
SN74CBTLV16292VR Features
Supplied in the 56-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
Operating with the supply current of 10μA
SN74CBTLV16292VR Applications
There are a lot of Texas Instruments SN74CBTLV16292VR Signal Switches / Multiplexers / Decoders applications.
- Home automation system
- Data communication
- Data distribution
- Image transmission
- High-performance memory systems
- Electronics industry
- Data demultiplexing
- Telephone network
- Medium scale TV wall
- Encrypted communications system