banner_page

SN74CBTLV16800DL

48 Terminations2.3V~3.6V 48 Pin 74CBTLV16800 Signal switch74CBTLV Series 2 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74CBTLV16800DL
  • Package: 48-BSSOP (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 802
  • Description: 48 Terminations2.3V~3.6V 48 Pin 74CBTLV16800 Signal switch74CBTLV Series 2 Functions(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 48-BSSOP (0.295, 7.50mm Width)
Number of Pins 48
Weight 600.301152mg
Operating Temperature -40°C~85°C
Packaging Tube
Series 74CBTLV
JESD-609 Code e4
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 48
Termination SMD/SMT
Type Bus Switch
Resistance 7Ohm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Bus Driver/Transceivers
Technology CMOS
Voltage - Supply 2.3V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 2.5V
Terminal Pitch 0.635mm
Base Part Number 74CBTLV16800
Pin Count 48
Circuit 10 x 1:1
Supply Voltage-Max (Vsup) 3.6V
Number of Ports 2
Nominal Supply Current 10μA
Output Current 64mA
Number of Bits 20
Propagation Delay 250 ps
Quiescent Current 10μA
Turn On Delay Time 7.7 ns
Family CBTLV/3B
Output Characteristics 3-STATE
Supply Type Single
Output Polarity TRUE
High Level Output Current -128mA
Low Level Output Current 128mA
Voltage Supply Source Single Supply
Independent Circuits 2
Length 15.875mm
Width 7.49mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74CBTLV16800DL Overview


In order to save board space, digital switch is located in the 48-BSSOP (0.295, 7.50mm Width).As a result, it is packaged in a way that is referred to as Tube.The mounting method digital switch ic uses is Surface Mount.the multiplexers uses an analog IC Bus Switch.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.Designers have greater flexibility using digital controlled switch when it works with 2.3V~3.6V voltage.The multiplexers can be used for a wide range of applications since they are members of 74CBTLV series.It is designed with 48 terminations as part of its basic configuration.As its base part number is 74CBTLV16800, logic switch can also be used to find its related parts.The multiplexer's system is powered by 2.5V voltage.A component pin count of 48 can be found on this turn signal switch.GULL WING represents the end of conductors.Single is used as its supply type.Currently, it is configured with 48 pins.The mounting is in the way of Surface Mount.The logic switch belongs to the family of CBTLV/3B.Signal multiplexer provides 20 bits.The maximal supply voltage (Vsup) should be kept at 3.6V to avoid some unnecessary failures.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.It consumes 10μA current of multiplexer ic since it is not affected by external factors.This signal switching operates at a resistance of 2.With a resistance of 7Ohm, it operates.For higher switches' flexibility, the output current is set to 64mA.

SN74CBTLV16800DL Features


Supplied in the 48-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single

SN74CBTLV16800DL Applications


There are a lot of Texas Instruments SN74CBTLV16800DL Signal Switches / Multiplexers / Decoders applications.

  • Image transmission
  • Code conversion
  • Steel plants
  • Telephone network
  • A/D converters
  • Relay
  • Encrypted communications system
  • Injectors
  • Microprocessor memory systems
  • HDMI applications

Write a review

Note: HTML is not translated!
    Bad           Good