SN74CBTLV16800DLR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 599.989307mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74CBTLV16800 |
| Pin Count | 48 |
| Circuit | 10 x 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Nominal Supply Current | 10μA |
| Output Current | 64mA |
| Number of Bits | 20 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 10μA |
| Turn On Delay Time | 7.7 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.01mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTLV16800DLR Overview
It is included in the 48-BSSOP (0.295, 7.50mm Width) in order to save board space.Tape & Reel (TR) is the packaging method.As far as mounting is concerned, digital switch ic uses Surface Mount.For the analog part of the multiplexers, an IC Bus Switch is used.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.When digital controlled switch operates at 2.3V~3.6V, designers have superior flexibility.The multiplexers can be used for a wide range of applications since they are members of 74CBTLV series.Among its basic features are 48 terminations.There is a base part number 74CBTLV16800 that can be used to locate signal switch's related components as well.The multiplexer's system is powered by 2.5V volts.This turn signal switch has 48 component pins.As a result, conductors end at GULL WING.In this case, the supply type is Single.A total of 48 pins are configured on this board.The multiplexer ic is mounted in the direction of Surface Mount.There is a family of CBTLV/3B members.In this signal multiplexer, there are 20 bits provided.Keeping Vsup at 3.6V will prevent some unnecessary failures.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.In the absence of external influences, it consumes 10μA current of multiplexer ic.The switches package is packaged in accordance with TR.2 is the resistance at which it operates.This signal switching operates at a resistance of 7Ohm.For higher switches' flexibility, the output current is set to 64mA.
SN74CBTLV16800DLR Features
Supplied in the 48-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
SN74CBTLV16800DLR Applications
There are a lot of Texas Instruments SN74CBTLV16800DLR Signal Switches / Multiplexers / Decoders applications.
- Automatic health monitoring systems
- Data distribution
- Data-routing applications
- Metal detectors
- Video transmission
- Medium scale TV wall
- Transmission from the computer system of a satellite
- Recording transmission
- A/D converters
- Textile mills
