Parameters |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
48-TFSOP (0.240, 6.10mm Width) |
Number of Pins |
48 |
Weight |
223.195796mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74CBTLV |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Discontinued |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
48 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
7Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2.3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.5mm |
Base Part Number |
74CBTLV16800 |
Pin Count |
48 |
Circuit |
10 x 1:1 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
3.6V |
Number of Ports |
2 |
Nominal Supply Current |
10μA |
Output Current |
64mA |
Number of Bits |
20 |
Throw Configuration |
SPST |
Propagation Delay |
7.7 ns |
Quiescent Current |
10μA |
Turn On Delay Time |
7.7 ns |
Family |
CBTLV/3B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.01mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
2 |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
1.2mm |
Length |
12.5mm |
Width |
6.1mm |
Thickness |
1.15mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBTLV16800GR Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 48-TFSOP (0.240, 6.10mm Width).As a result, it is packaged in a way that is referred to as Cut Tape (CT).Surface Mount is the mounting method digital switch ic uses.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.A supply voltage of 2.3V~3.6V provides digital controlled switch's superior flexibility for designers.With the 74CBTLV series, the multiplexers are suitable for a diverse range of applications.This configuration includes 48 terminations as part of its basic functionality.Its logic switch base part number is 74CBTLV16800 which can also be used to find its logic switch related parts.For multiplexer's system, a voltage of 2.5V is supplied.In this turn signal switch, there are 48 components that can be connected to each pin.It employs GULL WING as the point at which conductors come to an end.The supply type of this multiplexer ic is Single.The board is configured with 48 pins.The mount is in Surface Mount.The logic switch belongs to the family of CBTLV/3B.In this signal multiplexer, there are 20 bits provided.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V so as to avoid some unnecessary failures.This is an the digital switch ic that is classified as Bus Driver/Transceivers.No external influence consumes 10μA current of multiplexer ic.The switches package is packaged in a way which is consistent with TR.2 is the resistance at which it operates.As far as the resistance is concerned, it operates with 7Ohm.There is an output current of 64mA that allows for greater switches' flexibility.
SN74CBTLV16800GR Features
Supplied in the 48-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
SN74CBTLV16800GR Applications
There are a lot of Texas Instruments SN74CBTLV16800GR Signal Switches / Multiplexers / Decoders applications.
- Telephone network
- Audio transmission
- Electronically controlled engine system
- Electronics industry
- War field flying robot with a night vision flying camera
- Speed synchronization of multiple motors in industries
- Medium scale TV wall
- Decimal decoder
- Data transfer
- Analog, digital or video signal switching