SN74CBTLV16800VR
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 48 |
| Weight | 123.490523mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74CBTLV16800 |
| Pin Count | 48 |
| Circuit | 10 x 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Nominal Supply Current | 10μA |
| Output Current | 64mA |
| Number of Bits | 20 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 10μA |
| Turn On Delay Time | 7.7 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.01mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTLV16800VR Overview
In order to save board space, digital switch is located in the 48-TFSOP (0.173, 4.40mm Width).As a result, it is packaged in the way of Cut Tape (CT).In terms of mounting, digital switch ic uses the method of Surface Mount.Bus Switch is the analog IC that the multiplexers uses.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.When operated with a 2.3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.These multiplexers are members of the 74CBTLV series, which provide extensive application potential.As parts of its basic configuration, 48 terminations are desgined.The base part number is 74CBTLV16800, which is also useful when looking up signal switch's related components.The multiplexer's system is powered by 2.5V voltage.This turn signal switch consists of 48 component pins.It is the end of conductors that is represented by GULL WING.As a type of supply, Single is employed.This multiplexer ic is configured with 48 pins.It is positioned in the direction of Surface Mount.The logic switch object belongs to the family of CBTLV/3B.Signal multiplexer contains 20 bits.The maximal supply voltage (Vsup) should be kept at 3.6V to avoid some unnecessary failures.Bus Driver/Transceiver is a category for the digital switch ics.Without the influence of external factors, it consumes 10μA current of multiplexer ic.The switches package is packaged in accordance with TR.The signal switching operates with a resistance of 2.In terms of resistance, it has a value of 7Ohm.For greater switches' flexibility, 64mA provides the output current.
SN74CBTLV16800VR Features
Supplied in the 48-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
SN74CBTLV16800VR Applications
There are a lot of Texas Instruments SN74CBTLV16800VR Signal Switches / Multiplexers / Decoders applications.
- Time division multiplexing system
- Data demultiplexing
- Speed synchronization of multiple motors in industries
- VGA
- Robotic vehicles
- HD surveillance system
- Analog, digital or video signal switching
- High-performance memory-decoding applications
- PCIe
- Textile mills
