SN74CBTLV3125D

14 Terminations2.3V~3.6V 14 Pin 74CBTLV3125 Signal switch74CBTLV Series 1 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CBTLV3125D
Package: 14-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 806
Description: 14 Terminations2.3V~3.6V 14 Pin 74CBTLV3125 Signal switch74CBTLV Series 1 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Number of Pins	14
Weight	129.387224mg
Operating Temperature	-40°C~85°C
Packaging	Tube
Series	74CBTLV
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
Type	Bus Switch
Resistance	7Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Bus Driver/Transceivers
Technology	CMOS
Voltage - Supply	2.3V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.5V
Terminal Pitch	1.27mm
Base Part Number	74CBTLV3125
Pin Count	14
Operating Supply Voltage	3.3V
Circuit	1 x 1:1
Supply Voltage-Max (Vsup)	3.6V
Supply Voltage-Min (Vsup)	2.3V
Number of Channels	4
Load Capacitance	50pF
Number of Ports	2
Nominal Supply Current	10μA
Output Current	64mA
Number of Bits	4
Propagation Delay	4.6 ns
Quiescent Current	10μA
Turn On Delay Time	4.6 ns
Family	CBTLV/3B
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	200MHz
Output Polarity	TRUE
High Level Output Current	-128mA
Low Level Output Current	128mA
Power Supply Current-Max (ICC)	0.01mA
Voltage Supply Source	Single Supply
Count Direction	BIDIRECTIONAL
Height	1.75mm
Length	8.65mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74CBTLV3125D Overview

Due to the fact that it is provided in the 14-SOIC (0.154, 3.90mm Width), digital switch allows the board to be compacted.The package is in the form of Tube.The mounting method digital switch ic uses is Surface Mount.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.When operated with a 2.3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.These multiplexers are members of the 74CBTLV series, which provide extensive application potential.This configuration includes 14 terminations as part of its basic functionality.To find signal switch's related components, a base part number of 74CBTLV3125 may also be used.The turn signal switch is supplied with a voltage of 2.5V volts.This turn signal switch consists of 14 component pins.As the end of conductors, it uses GULL WING.There is a type of supply Single that is employed in this case.With 14 pins, it is configured.The mounting is in the way of Surface Mount.The logic switch object belongs to the family of CBTLV/3B.The multiplexer ic provides 4 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2.3V.The maximal supply voltage (Vsup) should be kept at 3.6V to avoid some unnecessary failures.This is a signal switch that is categorized as Bus Driver/Transceivers.Without the influence of external factors, it consumes 10μA current of multiplexer ic.With a supply voltage of 3.3V, reliable performance of the multiplexers can be achieved.As far as the resistance is concerned, it operates with 2.The system operates with a resistance of 7Ohm.A total of 4 channels are used for transmission in the turn signal switch's circuit.Higher switches' flexibility is provided by providing 64mA as the output current.