SN74CBTLV3125DBQR
| Parameters | |
|---|---|
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.01mA |
| Voltage Supply Source | Single Supply |
| Count Direction | BIDIRECTIONAL |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Thickness | 1.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 74.502547mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Base Part Number | 74CBTLV3125 |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Circuit | 1 x 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 10μA |
| Output Current | 64mA |
| Number of Bits | 4 |
| Throw Configuration | SPST |
| Propagation Delay | 4.6 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 4.6 ns |
| Family | CBTLV/3B |
SN74CBTLV3125DBQR Overview
In order to conserve board space, digital switch is included in the 16-SSOP (0.154, 3.90mm Width).Cut Tape (CT) represents its packaging.The mounting method digital switch ic uses is Surface Mount.the multiplexers uses an analog IC Bus Switch.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 2.3V~3.6V, designers are provided with a greater degree of flexibility.Since they are members of the 74CBTLV series, they can be used in a wide variety of applications.As parts of its basic configuration, 16 terminations are desgined.The part number for 74CBTLV3125 can be used to find its logic switch related parts as well.The multiplexer's system works with 2.5V voltage.This turn signal switch has a total of 16 component pins.As a result, conductors end at GULL WING.As a type of supply, Single is employed.The board is configured with 16 pins.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is included into the family of CBTLV/3B.The multiplexer ic provides 4 bits.Keeping Vsup at 2.3V will prevent some unwanted failures.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceiver.It consumes 10μA current of multiplexer ic since it is not affected by external factors.If the supply voltage is 3.3V, reliable performance of the multiplexers can be achieved.TR is used to package the switches.2 is the resistance at which it operates.In terms of resistance, it has a value of 7Ohm.A total of 4 channels are used for transmission in the turn signal switch's circuit.It is possible to provide a current output of 64mA for greater switches' flexibility.
SN74CBTLV3125DBQR Features
Supplied in the 16-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
SN74CBTLV3125DBQR Applications
There are a lot of Texas Instruments SN74CBTLV3125DBQR Signal Switches / Multiplexers / Decoders applications.
- High-performance memory-decoding applications
- Microprocessor memory systems
- Communication system
- Enabling different functions units in microprocessor instruction decoding
- LVDS
- Arithmetic Logic Units
- Make full adder
- Data demultiplexing
- A robotic vehicle with the metal detector
- Transmission from the computer system of a satellite
