Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
14 |
Weight |
57.209338mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74CBTLV |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
Type |
Bus Switch |
Resistance |
7Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Voltage - Supply |
2.3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
2.5V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74CBTLV3125 |
Pin Count |
14 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
3.3V |
Circuit |
1 x 1:1 |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
2.3V |
Number of Channels |
4 |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
10μA |
Output Current |
64mA |
Number of Bits |
1 |
Propagation Delay |
250 ps |
Quiescent Current |
10μA |
Turn On Delay Time |
250 ps |
Family |
CBTLV/3B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
Output Polarity |
TRUE |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.01mA |
Voltage Supply Source |
Single Supply |
Count Direction |
BIDIRECTIONAL |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBTLV3125PWG4 Overview
For the purpose of saving board space, digital switch is included in the 14-TSSOP (0.173, 4.40mm Width).Tube is the method used for packaging.Digital switch ic uses a Surface Mount mounting method.The analog IC used in the multiplexers can be referred to as Bus Switch.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 2.3V~3.6V, designers are provided with a greater degree of flexibility.The multiplexers from 74CBTLV series can be used for a wide range of applications.Among its basic configurations are 14 terminations.The base part number is 74CBTLV3125, so you can find its logic switch related parts using that number.For multiplexer's system, a voltage of 2.5V is supplied.This turn signal switch consists of 14 component pins.As a result, GULL WING represents the end of the conductors.There is a type of supply Single that is employed in this case.This multiplexer ic is configured with 14 pins.As you can see, it is mounted in the direction of Surface Mount.The CBTLV/3B family includes the logic switch.In this signal multiplexer, there are 1 bits provided.Keeping Vsup at 2.3V will prevent some unwanted failures.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.No external influence consumes 10μA current of multiplexer ic.Supply voltages of 3.3V can provide reliable performance of the multiplexers.The signal switching operates with a resistance of 2.It operates with a resistance of 7Ohm.This turn signal switch's circuit uses 4 transmission channels.There is an output current of 64mA that allows for greater switches' flexibility.
SN74CBTLV3125PWG4 Features
Supplied in the 14-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
SN74CBTLV3125PWG4 Applications
There are a lot of Texas Instruments SN74CBTLV3125PWG4 Signal Switches / Multiplexers / Decoders applications.
- Data communication
- Analog to digital conversion
- Textile mills
- Memory system of computers
- Make half adder
- Automatic Monitoring systems
- Communication system
- Medium scale TV wall
- GLAN
- Metal detectors