SN74CBTLV3125RGYR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-VFQFN Exposed Pad |
| Number of Pins | 14 |
| Weight | 32.205058mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74CBTLV3125 |
| Pin Count | 14 |
| Operating Supply Voltage | 3.3V |
| Circuit | 1 x 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 10μA |
| Output Current | 64mA |
| Number of Bits | 4 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 10μA |
| Turn On Delay Time | 4.6 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.01mA |
| Voltage Supply Source | Single Supply |
| Count Direction | BIDIRECTIONAL |
| Height | 1mm |
| Length | 3.5mm |
| Width | 3.5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTLV3125RGYR Overview
As a means of saving space, digital switch is provided in the 14-VFQFN Exposed Pad.It is packaged in the way of Cut Tape (CT).For mounting, digital switch ic uses the method Surface Mount.As the analog part, the circuit uses an analog IC Bus Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.When operated with a 2.3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.With the 74CBTLV series, the multiplexers are suitable for a diverse range of applications.As part of its basic configuration, 14 terminations are designed as a part of it.The part number for 74CBTLV3125 can be used to find its logic switch related parts as well.In this case, 2.5V is the voltage supplied to the multiplexer's system.Signal switch has 14 component pins.In this case, the supply type is Single.A total of 14 pins are configured on this board.The mounting point is Surface Mount.Among the family of CBTLV/3B the logic switch is a member.In the signal multiplexer, there are 4 bits available.The minimal supply voltage (Vsup) should be kept at 2.3V to avoid some unnecessary failures.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.Without the influence of external factors, it consumes 10μA current of multiplexer ic.With a supply voltage of 3.3V, reliable performance of the multiplexers can be achieved.According to TR, the switches is packaged.As far as the resistance is concerned, it operates with 2.This signal switching operates at a resistance of 7Ohm.There are a total of 4 channels used for transmitting data in the turn signal switch's circuit.Higher switches' flexibility is provided by providing 64mA as the output current.
SN74CBTLV3125RGYR Features
Supplied in the 14-VFQFN Exposed Pad package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
SN74CBTLV3125RGYR Applications
There are a lot of Texas Instruments SN74CBTLV3125RGYR Signal Switches / Multiplexers / Decoders applications.
- A robotic vehicle with the metal detector
- Memory chips
- Video transmission
- RF-based home automation system
- Idle motor
- Microprocessor memory systems
- Microprocessor instruction decoding
- Frequency multiplexing system
- Logic gates for other digital devices
- Logic circuits
