SN74CBTLV3126DG4
| Parameters | |
|---|---|
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | BUS SWITCH |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Nominal Supply Current | 10μA |
| Current - Output | 64mA |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Quiescent Current | 10μA |
| Turn On Delay Time | 4.8 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| Prop. Delay@Nom-Sup | 0.25 ns |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Control Type | ENABLE HIGH |
| Power Supply Current-Max (ICC) | 0.02mA |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Weight | 129.387224mg |
SN74CBTLV3126DG4 Overview
Due to the lack of space on the board, digital switch is provided in the SOIC.Among its basic configurations are 14 terminations.The turn signal switch is supplied with a voltage of 2.5V volts.This turn signal switch consists of 14 component pins.It is the end of conductors that is represented by GULL WING.In this case, the supply type is Single.It is configured with 14 pins.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch object belongs to the family of CBTLV/3B.As a result, signal multiplexer provides a total of 1 bits.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.Without any external influences, it consumes 10μA current of multiplexer ic at all times.The performance of the multiplexers can be reliably maintained at a voltage of 3.3V.A TUBE packaging method is used in the switches.The system operates with a resistance of 2.The system operates with a resistance of 7Ohm.For transmission, there are 4 channels in the turn signal switch's circuit.Signal switchs at temperatures up to 85°C are acceptable.In order to maintain a minimal operating temperature of the multiplexer, it should be set at -40°C.According to the applicable device specification, the signal switches operates at a maximum supply voltage of 3.6V.A minimum supply voltage of 2.3V is required to operate the digital swith.In addition, it provides improved features of BUS SWITCH.It uses the logic IC BUS DRIVER as its core logic unit.
SN74CBTLV3126DG4 Features
Supplied in the SOIC package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
BUS SWITCH
BUS DRIVER as the logic IC
SN74CBTLV3126DG4 Applications
There are a lot of Texas Instruments SN74CBTLV3126DG4 Signal Switches / Multiplexers / Decoders applications.
- Data bus control
- HD surveillance system
- Data communication
- CPU memory location identification
- Microprocessor memory systems
- Control unit of Central Processing unit (CPU)
- Encrypted communications system
- Electronics industry
- Data distribution
- Automatic health monitoring systems
