SN74CBTLV3126DR

14 Terminations2.3V~3.6V 14 Pin 74CBTLV3126 Signal switch74CBTLV Series 1 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CBTLV3126DR
Package: 14-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 901
Description: 14 Terminations2.3V~3.6V 14 Pin 74CBTLV3126 Signal switch74CBTLV Series 1 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Number of Pins	14
Weight	129.387224mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Series	74CBTLV
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Type	Bus Switch
Resistance	7Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Bus Driver/Transceivers
Packing Method	TR
Technology	CMOS
Voltage - Supply	2.3V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.5V
Terminal Pitch	1.27mm
Base Part Number	74CBTLV3126
Pin Count	14
Operating Supply Voltage	3.3V
Circuit	1 x 1:1
Polarity	Non-Inverting
Supply Voltage-Max (Vsup)	3.6V
Supply Voltage-Min (Vsup)	2.3V
Number of Channels	4
Number of Ports	2
Nominal Supply Current	10μA
Output Current	64mA
Number of Bits	4
Throw Configuration	SPST
Propagation Delay	250 ps
Quiescent Current	10μA
Turn On Delay Time	4.8 ns
Family	CBTLV/3B
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	200MHz
Prop. Delay@Nom-Sup	0.25 ns
High Level Output Current	-128mA
Low Level Output Current	128mA
Power Supply Current-Max (ICC)	0.02mA
Voltage Supply Source	Single Supply
Count Direction	BIDIRECTIONAL
Translation	N/A
Height	1.75mm
Length	8.65mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74CBTLV3126DR Overview

It is included in the 14-SOIC (0.154, 3.90mm Width) in order to save board space.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.For the analog part of the multiplexers, an IC Bus Switch is used.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.The turn signal switch is designed for use with a 2.3V~3.6V supply voltage, which gives it a lot of flexibility.These multiplexers are members of the 74CBTLV series, which provide extensive application potential.As parts of its basic configuration, 14 terminations are desgined.Its logic switch base part number is 74CBTLV3126 which can also be used to find its logic switch related parts.The multiplexer's system is powered by 2.5V volts.Currently, this turn signal switch has a total of 14 component pins.GULL WING represents the end of conductors.As a type of supply, Single is employed.Currently, it is configured with 14 pins.The mounting is in the way of Surface Mount.The logic switch object belongs to the family of CBTLV/3B.In the signal multiplexer, there are 4 bits available.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 2.3V.It is advisable that the maximal supply voltage (Vsup) remains at 3.6V to avoid some unnecessary failures.The part belongs to the Bus Driver/Transceivers category of signal switches.There are no external influences on this multiplexer ic, so it consumes 10μA current.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 3.3V.The switches is packaged according to the way of TR.The system operates with a resistance of 2.A resistance of 7Ohm is used to operate the signal switching.The turn signal switch's circuit has 4 transmission channels.For greater switches' flexibility, the output current of 64mA is provided.