SN74CBTLV3126PWR

14 Terminations2.3V~3.6V 14 Pin 74CBTLV3126 Signal switch74CBTLV Series 1 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CBTLV3126PWR
Package: 14-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 224
Description: 14 Terminations2.3V~3.6V 14 Pin 74CBTLV3126 Signal switch74CBTLV Series 1 Functions(Kg)

Details

Tags

Parameters
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Number of Pins	14
Weight	57.209338mg
Operating Temperature	-40°C~85°C
Packaging	Cut Tape (CT)
Series	74CBTLV
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Type	Bus Switch
Resistance	7Ohm
Subcategory	Bus Driver/Transceivers
Packing Method	TR
Technology	CMOS
Voltage - Supply	2.3V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.5V
Base Part Number	74CBTLV3126
Pin Count	14
Output Voltage	2V
Operating Supply Voltage	3.3V
Circuit	1 x 1:1
Polarity	Non-Inverting
Supply Voltage-Max (Vsup)	3.6V
Supply Voltage-Min (Vsup)	2.3V
Number of Channels	4
Number of Ports	2
Output Current	64A
Max Supply Current	10μA
Number of Bits	4
Throw Configuration	SPST
Propagation Delay	250 ps
Quiescent Current	10μA
Turn On Delay Time	4.8 ns
Family	CBTLV/3B
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	200MHz
Nominal Input Voltage	1.7V
Prop. Delay@Nom-Sup	0.25 ns
High Level Output Current	-128mA
Low Level Output Current	128mA
Power Supply Current-Max (ICC)	0.02mA
Voltage Supply Source	Single Supply
Count Direction	BIDIRECTIONAL
Translation	N/A
Drain to Source Resistance	7Ohm
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week

SN74CBTLV3126PWR Overview

Due to the fact that it is provided in the 14-TSSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.It is packaged in the way of Cut Tape (CT).The method digital switch ic adopts for mounting is Surface Mount.As the analog part, the circuit uses an analog IC Bus Switch.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.When digital controlled switch operates at 2.3V~3.6V, designers are provided with a greater degree of flexibility.Several applications are possible for 74CBTLV series multiplexers.It is designed with 14 terminations as part of its basic configuration.Its logic switch base part number is 74CBTLV3126 which can also be used to find its logic switch related parts.In multiplexer's system, 2.5V is the voltage supplied.This turn signal switch contains 14 component pins.As a result, conductors end at GULL WING.There is a type of supply Single that is employed in this case.Currently, it is configured with 14 pins.It is mounted in the way of Surface Mount.The logic switch is a member of the family of CBTLV/3B.Signal multiplexer provides 4 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 2.3V so that unnecessary failures can be prevented.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V so as to avoid some unnecessary failures.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.Despite not interacting with external factors, it consumes 10μA current of multiplexer ic.Reliable performance of the multiplexers can be achieved when a supply voltage of 3.3V is provided.In accordance with TR, switches can be packaged.A resistance of 2 is used to operate the signal switching.A resistance of 7Ohm is used to operate the signal switching.The turn signal switch's circuit consists of 4 transmission channels.There is an output current of 64A that allows for greater switches' flexibility.