Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SSOP (0.154, 3.90mm Width) |
Number of Pins |
20 |
Weight |
125.786834mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CBTLV |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
7Ohm |
Additional Feature |
WITH DIRECTION CONTROL |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2.3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.635mm |
Base Part Number |
74CBTLV3245 |
Pin Count |
20 |
Operating Supply Voltage |
3.3V |
Circuit |
8 x 1:1 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
2.3V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
20μA |
Output Current |
64mA |
Number of Bits |
8 |
Throw Configuration |
SPST |
Propagation Delay |
250 ps |
Quiescent Current |
20μA |
Turn On Delay Time |
6.4 ns |
Family |
CBTLV/3B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
Prop. Delay@Nom-Sup |
0.25 ns |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Count Direction |
BIDIRECTIONAL |
Height |
1.75mm |
Length |
8.65mm |
Width |
3.9mm |
Thickness |
1.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBTLV3245ADBQR Overview
Due to the fact that it is provided in the 20-SSOP (0.154, 3.90mm Width), digital switch allows the board to be compacted.Tape & Reel (TR) represents its packaging.The mounting method digital switch ic uses is Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Using a 2.3V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 74CBTLV series, these multiplexers have a wide range of applications.There is a design for terminating 20 as part of its basic configuration.The base part number is 74CBTLV3245, which is also useful when looking up signal switch's related components.The voltage supplied for multiplexer's system is 2.5V.multiplexer's systemA component pin count of 20 is found on this turn signal switch.GULL WING represents the end of conductors.Its supply type is Single, which is used as the source of power.With 20 pins, it is configured.It is positioned in the direction of Surface Mount.In the CBTLV/3B family, the logic switch is included.There are 8 bits in signal multiplexer.Keeping Vsup at 2.3V will prevent some unwanted failures.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.It consumes 20μA current of multiplexer ic without external influences.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 3.3V.Currently, the switches is packaged in accordance with the TR method.The signal switching operates with a resistance of 2.With a resistance of 7Ohm, it operates.In addition, WITH DIRECTION CONTROL provides improved characteristics.For higher switches' flexibility, the output current is set to 64mA.
SN74CBTLV3245ADBQR Features
Supplied in the 20-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
WITH DIRECTION CONTROL
SN74CBTLV3245ADBQR Applications
There are a lot of Texas Instruments SN74CBTLV3245ADBQR Signal Switches / Multiplexers / Decoders applications.
- Make full adder
- Code converters
- Microprocessor memory systems
- Injectors
- Memory chips
- Video transmission
- Relay
- Small scale TV wall
- Seven segment displays
- Enabling block of memory depending on address in memory chips