SN74CBTLV3245ADGVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 60.186038mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH DIRECTION CONTROL |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74CBTLV3245 |
| Pin Count | 20 |
| Operating Supply Voltage | 3.3V |
| Circuit | 8 x 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 20μA |
| Output Current | 64mA |
| Number of Bits | 8 |
| Throw Configuration | SPST |
| Propagation Delay | 6.4 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 6.4 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Prop. Delay@Nom-Sup | 0.25 ns |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Count Direction | BIDIRECTIONAL |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTLV3245ADGVR Overview
Providing this information in the 20-TFSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.In this case, it is packaged as Cut Tape (CT).Digital switch ic uses a Surface Mount mounting method.A digital IC Bus Switch is used as the analog component of the multiplexers.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.Designers have greater flexibility using digital controlled switch when it works with 2.3V~3.6V voltage.Multiplexers in the 74CBTLV series are suitable for a wide range of applications.There is a design for terminating 20 as part of its basic configuration.In addition, it also has a base part number of 74CBTLV3245, which can be used to find related parts.For multiplexer's system, 2.5V voltage is supplied.Signal switch has 20 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply Single that is employed in this case.There are 20 pins on it.The mounting point is Surface Mount.In the CBTLV/3B family, the logic switch is included.As a result, signal multiplexer provides a total of 8 bits.Keeping Vsup at 2.3V will prevent some unwanted failures.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.This is a signal switch that is categorized as Bus Driver/Transceiver.Without external influences, it consumes 20μA current of multiplexer ic.Supply voltages of 3.3V can provide reliable performance of the multiplexers.A TR packaging method is used in the switches.2 is the resistance at which it operates.In terms of resistance, it has a value of 7Ohm.Also, it provides an improved version of the characteristics of WITH DIRECTION CONTROL.The output current of 64mA is provided for higher switches' flexibility.
SN74CBTLV3245ADGVR Features
Supplied in the 20-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
WITH DIRECTION CONTROL
SN74CBTLV3245ADGVR Applications
There are a lot of Texas Instruments SN74CBTLV3245ADGVR Signal Switches / Multiplexers / Decoders applications.
- Enabling different rows of memory depending on address in memory chips
- High-performance memory systems
- Automatic health monitoring systems
- Analog, digital or video signal switching
- Night vision cameras
- High-performance memory-decoding applications
- Decimal decoder
- Signal router
- CPU memory location identification
- To select different task for memory in microprocessor memory systems
