SN74CBTLV3245ADWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Additional Feature | WITH DIRECTION CONTROL |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Base Part Number | 74CBTLV3245 |
| Pin Count | 20 |
| Operating Supply Voltage | 3.3V |
| Circuit | 8 x 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 20μA |
| Output Current | 64mA |
| Number of Bits | 8 |
| Throw Configuration | SPST |
| Propagation Delay | 6.4 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 6.4 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Prop. Delay@Nom-Sup | 0.25 ns |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Count Direction | BIDIRECTIONAL |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTLV3245ADWR Overview
As a means of saving space, digital switch is provided in the 20-SOIC (0.295, 7.50mm Width).It is packaged according to the Tape & Reel (TR) method.Mounting is performed using Surface Mount.In the multiplexers, the analog IC is indicated by Bus Switch.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility using digital controlled switch when it works with 2.3V~3.6V voltage.As a member of 74CBTLV series, the multiplexers can be used for a wide range of applications.As part of its basic configuration, 20 terminations are designed as a part of it.The base part number is 74CBTLV3245, so you can find its logic switch related parts using that number.For multiplexer's system, a voltage of 2.5V is supplied.This turn signal switch has 20 component pins.It employs GULL WING as the point at which conductors come to an end.In this case, the supply type is Single.Currently, it is configured with a 20 pin configuration.This unit is mounted in the way of Surface Mount.The logic switch is a member of the family of CBTLV/3B.There are 8 bits in signal multiplexer.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2.3V.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.It consumes 20μA current of multiplexer ic without external influences.With a supply voltage of 3.3V, reliable performance of the multiplexers can be achieved.The switches package is packaged in a way which is consistent with TR.With a resistance of 0, it operates.With a resistance of 7Ohm, it operates.The characteristics of WITH DIRECTION CONTROL are also improved.There is an output current of 64mA that allows for greater switches' flexibility.
SN74CBTLV3245ADWR Features
Supplied in the 20-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
WITH DIRECTION CONTROL
SN74CBTLV3245ADWR Applications
There are a lot of Texas Instruments SN74CBTLV3245ADWR Signal Switches / Multiplexers / Decoders applications.
- Electronic circuits
- To select different devices in microprocessor input
- Logic gates for other digital devices
- Robotic vehicles
- Code conversion
- Arithmetic Logic Units
- CNC machines
- GLAN
- Data demultiplexing
- Memory chips
