SN74CBTLV3245AGQNR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFBGA |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTLV |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | Bus Switch |
| Resistance | 20Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74CBTLV3245 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Circuit | 8 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Ports | 2 |
| Nominal Supply Current | 20μA |
| Number of Bits | 8 |
| Propagation Delay | 250 ps |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 4mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74CBTLV3245AGQNR Overview
Due to the lack of space on the board, digital switch is provided in the 20-VFBGA.The package is packaged in the manner of Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.In the multiplexers, the analog IC Bus Switch is used.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.Design engineers have more flexibility when digital controlled switch operates at 2.3V~3.6V voltage.Multiplexers of the 74CBTLV series can be used in a wide range of applications.As parts of its basic configuration, 20 terminations are desgined.There is a base part number of 74CBTLV3245 which can also be used in order to locate the logic switch that are related to this item.In this case, 2.5V is the voltage supplied to the multiplexer's system.In this turn signal switch, there are 20 component pins.Using the point BALL as an end point of conductors, it is used to determine the terminus of a conductor.Single is employed as its supply type.Currently, it is configured with a 20 pin configuration.The mounting is in the way of Surface Mount.Among the family of CBTLV/3B the logic switch is a member.The multiplexer ic provides 8 bits.To avoid unnecessary failures, keep the supply voltage at 2.3V (Vsup).It is advisable that the maximal supply voltage (Vsup) remains at 3.6V to avoid some unnecessary failures.It is provided that 2.5/3.3V has a power supply in order to function normally.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.This signal switching operates at a resistance of 2.A resistance of 20Ohm is used to operate it.
SN74CBTLV3245AGQNR Features
Supplied in the 20-VFBGA package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
SN74CBTLV3245AGQNR Applications
There are a lot of Texas Instruments SN74CBTLV3245AGQNR Signal Switches / Multiplexers / Decoders applications.
- Idle motor
- Data bus control
- High-performance memory systems
- Code conversion
- D/A converters
- Medium scale TV wall
- Speed synchronization of multiple motors in industries
- Video transmission
- Data communication
- HDMI applications
