SN74CBTLV3245APW

20 Terminations2.3V~3.6V 20 Pin 74CBTLV3245 Signal switch74CBTLV Series 1 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CBTLV3245APW
Package: 20-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 173
Description: 20 Terminations2.3V~3.6V 20 Pin 74CBTLV3245 Signal switch74CBTLV Series 1 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	20-TSSOP (0.173, 4.40mm Width)
Number of Pins	20
Weight	76.997305mg
Operating Temperature	-40°C~85°C
Packaging	Tube
Series	74CBTLV
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Type	Bus Switch
Resistance	27Ohm
Additional Feature	WITH DIRECTION CONTROL
Subcategory	Bus Driver/Transceiver
Technology	CMOS
Voltage - Supply	2.3V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.5V
Terminal Pitch	0.65mm
Base Part Number	74CBTLV3245
Pin Count	20
Operating Supply Voltage	3.3V
Circuit	8 x 1:1
Supply Voltage-Max (Vsup)	3.6V
Supply Voltage-Min (Vsup)	2.3V
Load Capacitance	50pF
Number of Ports	2
Nominal Supply Current	20μA
Output Current	64mA
Number of Bits	8
Propagation Delay	250 ps
Quiescent Current	20μA
Turn On Delay Time	6.4 ns
Family	CBTLV/3B
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	200MHz
Output Polarity	TRUE
Prop. Delay@Nom-Sup	0.25 ns
High Level Output Current	-128mA
Low Level Output Current	128mA
Voltage Supply Source	Single Supply
Independent Circuits	1
Count Direction	BIDIRECTIONAL
Drain to Source Resistance	5Ohm
Height	1.2mm
Length	6.5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74CBTLV3245APW Overview

As a means of saving space, digital switch is provided in the 20-TSSOP (0.173, 4.40mm Width).It is packaged according to the Tube method.Digital switch ic adheres to a mounting method of Surface Mount.Bus Switch is the analog IC that the multiplexers uses.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.The turn signal switch is designed for use with a 2.3V~3.6V supply voltage, which gives it a lot of flexibility.The multiplexers from 74CBTLV series can be used for a wide range of applications.Its basic configuration includes terminations in the 20 range.To find signal switch's related components, a base part number of 74CBTLV3245 may also be used.The turn signal switch is supplied with a voltage of 2.5V volts.In this turn signal switch, there are 20 component pins.A conductor terminates at GULL WING.As a type of supply, Single is employed.The board has 20 pins configured.As you can see, it is mounted in the direction of Surface Mount.The logic switch belongs to the family of CBTLV/3B.In the signal multiplexer, there are 8 bits available.To avoid unnecessary failures, keep the supply voltage at 2.3V (Vsup).Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceiver.There are no external influences on this multiplexer ic, so it consumes 20μA current.Using a supply voltage of 3.3V can result in reliable performance of the multiplexers.The system operates with a resistance of 2.As far as the resistance is concerned, it operates with 27Ohm.Additionally, it improves the characteristics of WITH DIRECTION CONTROL.For greater switches' flexibility, the output current of 64mA is provided.

SN74CBTLV3245APW Features

Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
WITH DIRECTION CONTROL