SN74CBTLV3245APWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 20 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Nominal Supply Current | 20μA |
| Current - Output | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 250 ps |
| Quiescent Current | 20μA |
| Turn On Delay Time | 6.4 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Independent Circuits | 1 |
| Height | 1.15mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74CBTLV3245APWG4 Overview
Providing this information in the TSSOP enables digital switch board space to be saved.The basic configuration of this system includes 20 terminations.The turn signal switch is supplied with a voltage of 2.5V volts.A component pin count of 20 is found on this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.This supply type employs Single.Currently, it is configured with 20 pins.The mounting is in the way of Surface Mount.There is a family of CBTLV/3B members.In this signal multiplexer, there are 8 bits provided.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.In the absence of external influences, it consumes 20μA current of multiplexer ic.Using a supply voltage of 3.3V can result in reliable performance of the multiplexers.2 ports are used for some other peripheral signal switchings to plug in.A resistance of 7Ohm is used to operate it.The signal switch can operate at a maximum temperature of 85°C.In order to maintain a minimal operating temperature, the temperature of the multiplexer should be set to -40°C.The relevant device specification specifies a maximum supply voltage of 3.6V for the signal switches.In compliance with the applicable device specification, the digital swith operates at a minimum supply voltage of 2.3V.It employs BUS DRIVER as its logic IC.
SN74CBTLV3245APWG4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
BUS DRIVER as the logic IC
SN74CBTLV3245APWG4 Applications
There are a lot of Texas Instruments SN74CBTLV3245APWG4 Signal Switches / Multiplexers / Decoders applications.
- Solenoid cooling fan
- Data distribution
- To select different devices in microprocessor output
- Code converters
- Night vision cameras
- RF-based home automation system
- Automatic health monitoring systems
- Speed control of medern motors
- Code conversion
- Memory system of computers
