Parameters |
Number of Channels |
1 |
Operating Supply Current |
10μA |
Propagation Delay |
7.2 ns |
Quiescent Current |
10μA |
Turn On Delay Time |
7.2 ns |
Family |
CBTLV/3B |
Logic Function |
Demultiplexer, Multiplexer |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.9mm |
Thickness |
1.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SSOP (0.154, 3.90mm Width) |
Number of Pins |
16 |
Weight |
74.502547mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74CBTLV |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Multiplexer/Demultiplexer |
Resistance |
40Ohm |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2.3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.64mm |
Base Part Number |
74CBTLV3251 |
Pin Count |
16 |
Number of Outputs |
8 |
Circuit |
1 x 8:1 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
2.5/3.3V |
Supply Voltage-Min (Vsup) |
2.3V |
SN74CBTLV3251DBQR Overview
As a means of saving space, digital switch is provided in the 16-SSOP (0.154, 3.90mm Width).The package is packaged in the manner of Cut Tape (CT).As far as mounting is concerned, digital switch ic uses Surface Mount.Multiplexer/Demultiplexer is the analog IC that the multiplexers uses.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.When digital controlled switch operates at 2.3V~3.6V, designers are provided with a greater degree of flexibility.Multiplexers from the 74CBTLV series can be used in a wide range of applications.As parts of its basic configuration, 16 terminations are desgined.In addition, it also has a base part number of 74CBTLV3251, which can be used to find related parts.For multiplexer's system, a voltage of 2.5V is supplied.This turn signal switch has a total of 16 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply of Single.The board is configured with 16 pins.Surface Mount is the way it is mounted.The logic switch is a member of the CBTLV/3B family.Vsup should be kept at 2.3V to prevent some unnecessary failures.It is advisable that the maximal supply voltage (Vsup) remains at 3.6V to avoid some unnecessary failures.The power supply of 2.5/3.3V is provided for mux switch's normal operation.The turn signal switch has 8 outputs designed for operation.It consumes 10μA current of multiplexer ic since it is not affected by external factors.Currently, the switches is packaged in accordance with the TR method.With a resistance of 40Ohm, it operates.A total of 1 channels are used for transmission in the turn signal switch's circuit.If the load is supplied with a voltage of 10μA, stability of the multiplexers can be maintained.
SN74CBTLV3251DBQR Features
Supplied in the 16-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
Operating with the supply current of 10μA
SN74CBTLV3251DBQR Applications
There are a lot of Texas Instruments SN74CBTLV3251DBQR Signal Switches / Multiplexers / Decoders applications.
- PCIe
- Microprocessor memory systems
- Telephone network
- Analog, digital or video signal switching
- Data communication
- Decimal decoder
- Arithmetic Logic Units
- Speed control of medern motors
- To select different devices in microprocessor input
- Computer memory