SN74CBTLV3251DGVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 41.900595mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 40Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Logic ICs |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74CBTLV3251 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Circuit | 1 x 8:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Channels | 1 |
| Operating Supply Current | 10μA |
| Propagation Delay | 250 ps |
| Quiescent Current | 10μA |
| Turn On Delay Time | 7.2 ns |
| Family | CBTLV/3B |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height | 1.2mm |
| Length | 3.6mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTLV3251DGVR Overview
Due to the lack of space on the board, digital switch is provided in the 16-TFSOP (0.173, 4.40mm Width).It is packaged according to the Cut Tape (CT) method.Digital switch ic uses a Surface Mount mounting method.The analog IC in the multiplexers is identified as Multiplexer/Demultiplexer.The operating temperature of -40°C~85°C will not be susceptible to external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 2.3V~3.6V.provides digital controlled switch's digital controlled switch'sThese multiplexers are members of the 74CBTLV series, which provide extensive application potential.There are 16 terminations included in its basic configuration.The base part number is 74CBTLV3251, which is also useful when looking up signal switch's related components.The turn signal switch is supplied with a voltage of 2.5V volts.In this turn signal switch, there are 16 component pins.Conductors terminate at GULL WING in this design.Single is employed as its supply type.A total of 16 pins are configured on this board.It is mounted in the way of Surface Mount.In the CBTLV/3B family, the logic switch is included.Vsup should be kept at 2.3V to prevent some unnecessary failures.The maximal supply voltage (Vsup) should be kept at 3.6V to avoid some unnecessary failures.In order to maintain mux switch's normal operation, power is provided to 2.5/3.3V.The turn signal switch contains 8 outputs designed to operate.Part number Other Logic ICs indicates that the digital switch ic is an electronic part.There are no external influences on this multiplexer ic, so it consumes 10μA current.This multiplexer has a total of 8 inputs.The switches is packaged according to the way of TR.40Ohm is the resistance at which it operates.The turn signal switch's circuit consists of 1 channels that are being used for transmission in the circuit.If the load is supplied with 10μA voltage, stability of the multiplexers can be maintained.
SN74CBTLV3251DGVR Features
Supplied in the 16-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
Operating with the supply current of 10μA
SN74CBTLV3251DGVR Applications
There are a lot of Texas Instruments SN74CBTLV3251DGVR Signal Switches / Multiplexers / Decoders applications.
- Control unit of Central Processing unit (CPU)
- War field flying robot with a night vision flying camera
- Implementing boolean functions with multiple variables
- HD surveillance system
- Automation system
- GLAN
- Medical industry
- Telephone network
- Robotic vehicles
- Data collection system
