SN74CBTLV3251DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 40Ohm |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Base Part Number | 74CBTLV3251 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Circuit | 1 x 8:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Channels | 1 |
| Operating Supply Current | 10μA |
| Propagation Delay | 7.2 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 7.2 ns |
| Family | CBTLV/3B |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTLV3251DR Overview
Due to the fact that it is provided in the 16-SOIC (0.154, 3.90mm Width), digital switch allows the board to be compacted.Cut Tape (CT) represents its packaging.Digital switch ic adheres to a mounting method of Surface Mount.In the multiplexers, the analog IC Multiplexer/Demultiplexer is used.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.The turn signal switch is designed for use with a 2.3V~3.6V supply voltage, which gives it a lot of flexibility.Multiplexers from the 74CBTLV series can be used in a wide range of applications.Among its basic configurations are 16 terminations.To find signal switch's related components, a base part number of 74CBTLV3251 may also be used.In this case, 2.5V is the voltage supplied to the multiplexer's system.This turn signal switch has 16 component pins.As the end of conductors, it uses GULL WING.In this case, the supply type is Single.A configuration of 16 pins is used.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the CBTLV/3B family.The minimal supply voltage (Vsup) should be kept at 2.3V to avoid some unnecessary failures.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.6V.During mux switch's normal operation, 2.5/3.3V is provided with a power supply.As part of the operation of this turn signal switch, there are 8 outputs.It consumes 10μA current of multiplexer ic since it is not affected by external factors.In this multiplexer, there is a total of 8 inputs.The switches package is packaged in accordance with TR.It operates with a resistance of 40Ohm.This turn signal switch's circuit uses 1 transmission channels.It is possible to maintain stability of the multiplexers when the load receives a supply voltage of 10μA.
SN74CBTLV3251DR Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
Operating with the supply current of 10μA
SN74CBTLV3251DR Applications
There are a lot of Texas Instruments SN74CBTLV3251DR Signal Switches / Multiplexers / Decoders applications.
- Signal router
- Relay
- Electronically controlled engine system
- Automatic health monitoring systems
- Image transmission
- Textile mills
- Microprocessor instruction decoding
- D/A converters
- To select different task for memory in microprocessor memory systems
- Data transfer
