Parameters |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
2.5V |
Pin Count |
16 |
Number of Outputs |
4 |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
2.3V |
Operating Supply Current |
10μA |
Number of Bits |
2 |
Propagation Delay |
250 ps |
Quiescent Current |
10μA |
Turn On Delay Time |
6.8 ns |
Family |
CBTLV/3B |
Logic Function |
Demultiplexer, Multiplexer |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
Output Polarity |
TRUE |
Logic IC Type |
MULTIPLEXER AND DEMUX/DECODER |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Independent Circuits |
1 |
Height |
1.58mm |
Length |
9.9mm |
Width |
3.91mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
Mount |
Surface Mount |
Package / Case |
SOIC |
Number of Pins |
16 |
Weight |
141.690917mg |
JESD-609 Code |
e4 |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
16 |
Resistance |
40Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
Other Logic ICs |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
SN74CBTLV3253DG4 Overview
Digital switch is provided in the SOIC for the purpose of saving board space.The basic configuration of this system includes 16 terminations.For multiplexer's system, a voltage of 2.5V is supplied.This turn signal switch contains 16 component pins.Conductors terminate at GULL WING in this design.There is a supply type of Single employed as part of this supply.Currently, it is configured with a 16 pin configuration.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is included into the family of CBTLV/3B.Signal multiplexer provides 2 bits.There are 4 outputs designed for the operation of the turn signal switch.In electronic terms, the digital switch ic is classified as Other Logic ICs.It consumes 10μA current of multiplexer ic without external influences.With a resistance of 40Ohm, it operates.It is acceptable for this signal switch to operate at the maximal temperature of 85°C.The minimal operating temperature of the multiplexer should be maintained at -40°C.The relevant device specification specifies a maximum supply voltage of 3.6V for the signal switches.Device specifications require that the digital swith operate at a minimum supply voltage of 2.3V.In terms of logic ICs, it uses MULTIPLEXER AND DEMUX/DECODER.If the load is supplied with 10μA voltage, stability of the multiplexers can be maintained.
SN74CBTLV3253DG4 Features
Supplied in the SOIC package
Adopting a supply type of Single
MULTIPLEXER AND DEMUX/DECODER as the logic IC
Operating with the supply current of 10μA
SN74CBTLV3253DG4 Applications
There are a lot of Texas Instruments SN74CBTLV3253DG4 Signal Switches / Multiplexers / Decoders applications.
- Speed control of medern motors
- Image transmission
- Electronic circuits
- Microprocessor instruction decoding
- Code conversion
- Microprocessor memory systems
- Enabling different functions units in microprocessor instruction decoding
- Audio transmission
- Data distribution
- Small scale TV wall