SN74CBTLV3257DG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Resistance | 40Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.5V |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Power Supplies | 2.5/3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 10μA |
| Number of Bits | 4 |
| Propagation Delay | 250 ps |
| Quiescent Current | 10μA |
| Turn On Delay Time | 6.1 ns |
| Family | CBTLV/3B |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| Logic IC Type | MULTIPLEXER AND DEMUX/DECODER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Independent Circuits | 1 |
| Height | 1.58mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74CBTLV3257DG4 Overview
Due to the fact that it is provided in the SOIC, digital switch allows the board to be compacted.Among its basic features are 16 terminations.The multiplexer's system is powered by 2.5V voltage.Currently, this turn signal switch has a total of 16 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply of Single.A total of 16 pins are configured on this board.The mounting is in the way of Surface Mount.In the CBTLV/3B family, the logic switch is included.In the signal multiplexer, there are 4 bits available.There is a power supply provided for the mux switch's normal operation of 2.5/3.3V.The turn signal switch has 2 outputs designed for operation.In electronic terms, the digital switch ic is classified as Other Logic ICs.It consumes 10μA current of multiplexer ic since it is not affected by external factors.A resistance of 40Ohm is used to operate the signal switching.The maximum operating temperature of 85°C is acceptable for this signal switch.It is recommended that the minimum operating temperature of the multiplexer be kept at -40°C.Based on the device specifications, the signal switches is designed to operate at 3.6V maximum supply voltage.A minimum supply voltage of 2.3V is required to operate the digital swith.IC MULTIPLEXER AND DEMUX/DECODER is used for the logic of this chip.When 10μA is delivered to the load, stability of the multiplexers can be maintained.
SN74CBTLV3257DG4 Features
Supplied in the SOIC package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
MULTIPLEXER AND DEMUX/DECODER as the logic IC
Operating with the supply current of 10μA
SN74CBTLV3257DG4 Applications
There are a lot of Texas Instruments SN74CBTLV3257DG4 Signal Switches / Multiplexers / Decoders applications.
- Small scale TV wall
- Medical industry
- Data communication
- RF-based home automation system
- Enabling block of memory depending on address in memory chips
- Memory chips
- Memory system of computers
- D/A converters
- Recording transmission
- Control unit of Central Processing unit (CPU)
