SN74CBTLV3257DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 40Ohm |
| Subcategory | Other Logic ICs |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.5V |
| Base Part Number | 74CBTLV3257 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Number of Elements | 1 |
| Circuit | 4 x 1:2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Channels | 4 |
| Operating Supply Current | 10μA |
| Throw Configuration | SPDT |
| Propagation Delay | 6.1 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 6.1 ns |
| Family | CBTLV/3B |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTLV3257DR Overview
Digital switch is provided in the 16-SOIC (0.154, 3.90mm Width) for the purpose of saving board space.It is packaged according to the Tape & Reel (TR) method.In terms of mounting, digital switch ic uses the Surface Mount method .The analog IC in the multiplexers is identified as Multiplexer/Demultiplexer.By keeping the operating temperature at -40°C~85°C TA, turn signal switch will not be affected by external factors.A supply voltage of 2.3V~3.6V provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 74CBTLV series, these multiplexers have a wide range of applications.The basic configuration of this system includes 16 terminations.The base part number is 74CBTLV3257, which is also useful when looking up signal switch's related components.For multiplexer's system, 2.5V voltage is supplied.This turn signal switch has 16 component pins.As a result, conductors end at GULL WING.There is a type of supply of Single.It is configured with 16 pins.As you can see, it is mounted in the direction of Surface Mount.The logic switch is a member of the CBTLV/3B family.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2.3V.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.Normally, 2.5/3.3V is powered by a battery.This turn signal switch has 2 outputs designed for its operation.Part number Other Logic ICs indicates that the digital switch ic is an electronic part.There are no external influences on this multiplexer ic, so it consumes 10μA current.It is provided with 8 inputs.Currently, the switches is packaged in accordance with the TR method.As far as the resistance is concerned, it operates with 40Ohm.This turn signal switch's circuit uses 4 transmission channels.The configuration of the mux switch contains 1 elements.It is possible to maintain stability of the multiplexers if the supply voltage to the load is set at 10μA.
SN74CBTLV3257DR Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
Operating with the supply current of 10μA
SN74CBTLV3257DR Applications
There are a lot of Texas Instruments SN74CBTLV3257DR Signal Switches / Multiplexers / Decoders applications.
- Automatic Monitoring systems
- Microprocessor instruction decoding
- Signal router
- Data transfer
- To select different devices in microprocessor output
- CPU memory location identification
- Electronics industry
- Electronically controlled engine system
- Relay
- High-performance memory-decoding applications
