SN74CBTLV3257DRE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Resistance | 27Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Other Logic ICs |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.5V |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Power Supplies | 2.5/3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Bits | 4 |
| Propagation Delay | 6.1 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 6.1 ns |
| Family | CBTLV/3B |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | MULTIPLEXER AND DEMUX/DECODER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74CBTLV3257DRE4 Overview
The reason it is provided is that the board space can be saved by placing digital switch in the SOIC.As a result, it is packaged in the way of Tape and Reel.There are 16 terminations included in its basic configuration.For multiplexer's system, 2.5V voltage is supplied.A component pin count of 16 is found on this turn signal switch.As a result, GULL WING represents the end of the conductors.Single is used as its supply type.With 16 pins, it is configured.It is positioned in the direction of Surface Mount.The logic switch belongs to the family of CBTLV/3B.As a result, signal multiplexer provides 4 bits.For mux switch's normal operation, power supply 2.5/3.3V is provided.For the turn signal switch's operation, there are 2 outputs.Other Logic ICs is the classification for this the digital switch ic.In the absence of external influences, it consumes 10μA current of multiplexer ic.This multiplexer has 8 inputs.Currently, the switches is packaged in accordance with the TR method.27Ohm is the resistance at which it operates.85°C is an acceptable maximum temperature for this signal switch.A temperature of the multiplexer of -40°C should be maintained for minimal operation.The signal switches is specified to operate at the maximum supply voltage of 3.6V in compliance with the applicable device specification.Typical device specifications specify a voltage supply of 2.3V for the digital swith.A logic IC based on MULTIPLEXER AND DEMUX/DECODER is employed in this system.
SN74CBTLV3257DRE4 Features
Supplied in the SOIC package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
MULTIPLEXER AND DEMUX/DECODER as the logic IC
SN74CBTLV3257DRE4 Applications
There are a lot of Texas Instruments SN74CBTLV3257DRE4 Signal Switches / Multiplexers / Decoders applications.
- Data collection system
- Logic circuits
- Video transmission
- Decimal decoder
- A/D converters
- Make full adder
- Combinational circuit
- Code conversion
- Electronically controlled engine system
- Encrypted communications system
