SN74CBTLV3383PWG4
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 24 |
| Power Supplies | 2.5/3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 4 |
| Current - Output | 64mA |
| Number of Bits | 5 |
| Propagation Delay | 250 ps |
| Quiescent Current | 10μA |
| Turn On Delay Time | 6 ns |
| Family | CBTLV/3B |
| Number of Inputs | 10 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| Logic IC Type | BUS EXCHANGER |
| Prop. Delay@Nom-Sup | 0.25 ns |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Control Type | ENABLE LOW |
| Independent Circuits | 1 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 24 |
| Weight | 90.009736mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Resistance | 27Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
SN74CBTLV3383PWG4 Overview
In order to conserve board space, digital switch is included in the TSSOP.The package is packaged in accordance with Rail/Tube.The basic configuration includes 24 terminations.In this case, 2.5V is the voltage supplied to the multiplexer's system.This turn signal switch has 24 component pins.It employs GULL WING as the point at which conductors come to an end.Single is employed as its supply type.Currently, it is configured with 24 pins.The mounting is in the way of Surface Mount.The logic switch belongs to the family of CBTLV/3B.The multiplexer ic provides 5 bits.A power supply is provided for mux switch's normal operation of 2.5/3.3V.Other Logic ICs is the classification for this the digital switch ic.Without any external influences, it consumes 10μA current of multiplexer ic at all times.The multiplexer is equipped with 10 inputs.The signal switching operates with a resistance of 4.The system operates with a resistance of 27Ohm.Signal switchs at temperatures up to 85°C are acceptable.It is recommended that a minimum operating temperature of the multiplexer of -40°C be maintained.In compliance with the applicable device specification, the signal switches has a maximum supply voltage of 3.6V.A minimum supply voltage of 2.3V is required to operate the digital swith.It uses the logic IC BUS EXCHANGER as its core logic unit.
SN74CBTLV3383PWG4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
BUS EXCHANGER as the logic IC
SN74CBTLV3383PWG4 Applications
There are a lot of Texas Instruments SN74CBTLV3383PWG4 Signal Switches / Multiplexers / Decoders applications.
- Microprocessor memory systems
- Video transmission
- Idle motor
- Paper plants
- Make full adder
- CPU memory location identification
- Arithmetic Logic Units
- Memory system of computers
- Enabling different functions units in microprocessor instruction decoding
- Steel plants
