Parameters |
Number of Pins |
24 |
Weight |
89.499445mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74CBTLV |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Type |
Bus FET Exchange Switch |
Resistance |
27Ohm |
Additional Feature |
TTL COMPATIBLE BUS SWITCH |
Subcategory |
Bus Driver/Transceiver |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2.3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.65mm |
Base Part Number |
74CBTLV3383 |
Pin Count |
24 |
Circuit |
5 x 2:2 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
2.5/3.3V |
Supply Voltage-Min (Vsup) |
2.3V |
Number of Ports |
4 |
Nominal Supply Current |
250mA |
Output Current |
64mA |
Number of Bits |
10 |
Throw Configuration |
DPDT |
Propagation Delay |
250 ps |
Quiescent Current |
10μA |
Turn On Delay Time |
6 ns |
Family |
CBTLV/3B |
Number of Inputs |
10 |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
Prop. Delay@Nom-Sup |
0.25 ns |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
1.2mm |
Length |
7.8mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-TSSOP (0.173, 4.40mm Width) |
SN74CBTLV3383PWR Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 24-TSSOP (0.173, 4.40mm Width).As a result, it is packaged in a way that is referred to as Cut Tape (CT).In terms of mounting, digital switch ic uses the Surface Mount method .A digital IC Bus FET Exchange Switch is used as the analog component of the multiplexers.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.When digital controlled switch operates at 2.3V~3.6V, designers have superior flexibility.The multiplexers from 74CBTLV series can be used for a wide range of applications.There are 24 terminations included in its basic configuration.There is a base part number 74CBTLV3383 that can be used to locate signal switch's related components as well.For multiplexer's system, 2.5V voltage is supplied.A component pin count of 24 can be found on this turn signal switch.Conductors terminate at GULL WING in this design.Its supply type is Single, which is used as the source of power.With 24 pins, it is configured.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is included into the family of CBTLV/3B.As a result, signal multiplexer provides 10 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 2.3V to avoid some unnecessary failures.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.6V.During mux switch's normal operation, 2.5/3.3V is provided with a power supply.Part number Bus Driver/Transceiver indicates that the digital switch ic is an electronic part.Without the influence of external factors, it consumes 10μA current of multiplexer ic.The multiplexer is equipped with 10 inputs.The switches package is packaged in accordance with the TR method.As far as the resistance is concerned, it operates with 4.It operates with a resistance of 27Ohm.In addition, TTL COMPATIBLE BUS SWITCH exhibits improved characteristics.There is an output current of 64mA that allows for greater switches' flexibility.
SN74CBTLV3383PWR Features
Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
TTL COMPATIBLE BUS SWITCH
SN74CBTLV3383PWR Applications
There are a lot of Texas Instruments SN74CBTLV3383PWR Signal Switches / Multiplexers / Decoders applications.
- Frequency multiplexing system
- RF-based home automation system
- Data-routing applications
- Image transmission
- Automatic health monitoring systems
- Make full adder
- A robotic vehicle with the metal detector
- Data bus control
- Metal detectors
- To select different devices in microprocessor input