SN74CBTLV3384DBQR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Weight | 129.500622mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.64mm |
| Base Part Number | 74CBTLV3384 |
| Pin Count | 24 |
| Circuit | 5 x 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Nominal Supply Current | 10μA |
| Output Current | 64mA |
| Number of Bits | 10 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 10μA |
| Turn On Delay Time | 5.5 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Thickness | 1.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTLV3384DBQR Overview
This is a relatively small item of digital switch that is included in the 24-SSOP (0.154, 3.90mm Width) in order to save space on the board.The package is packaged in accordance with Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.In the multiplexers, the analog IC Bus Switch is used.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 2.3V~3.6V, designers have superior flexibility.As a member of 74CBTLV series, the multiplexers can be used for a wide range of applications.Among its basic configurations are 24 terminations.The part number for 74CBTLV3384 can be used to find its logic switch related parts as well.The multiplexer's system is powered by 2.5V voltage.In this turn signal switch, there are 24 components that can be connected to each pin.At the end of a conductor, it uses GULL WING as the point where the conductor ends.Its supply type is Single, which is used as the source of power.The board has 24 pins configured.The mounting is in the way of Surface Mount.The logic switch belongs to the family of CBTLV/3B.As a result, signal multiplexer provides 10 bits.Keeping Vsup at 3.6V will prevent some unnecessary failures.Bus Driver/Transceivers is the classification for this the digital switch ic.Not being affected by the external factors, consumes 10μA current of multiplexer ic.A TR packaging method is used in the switches.The system operates with a resistance of 2.This signal switching operates at a resistance of 7Ohm.The output current of 64mA is provided for higher switches' flexibility.
SN74CBTLV3384DBQR Features
Supplied in the 24-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
SN74CBTLV3384DBQR Applications
There are a lot of Texas Instruments SN74CBTLV3384DBQR Signal Switches / Multiplexers / Decoders applications.
- Code conversion
- Signal router
- Make full adder
- Night vision cameras
- Transmission from the computer system of a satellite
- Seven segment displays
- HDMI applications
- Textile mills
- Speed control of medern motors
- Implementing boolean functions with multiple variables
