SN74CBTLV3384DGVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 60.894776mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74CBTLV3384 |
| Pin Count | 24 |
| Circuit | 5 x 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Nominal Supply Current | 10μA |
| Output Current | 64mA |
| Number of Bits | 10 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 10μA |
| Turn On Delay Time | 5.5 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTLV3384DGVR Overview
For the purpose of saving board space, digital switch is included in the 24-TFSOP (0.173, 4.40mm Width).Cut Tape (CT) is the packaging method.Surface Mount is the mounting method digital switch ic uses.In the multiplexers, the analog IC is indicated by Bus Switch.The operating temperature of -40°C~85°C will not be susceptible to external factors.The turn signal switch is designed for use with a 2.3V~3.6V supply voltage, which gives it a lot of flexibility.Multiplexers of the 74CBTLV series can be used in a wide range of applications.The basic configuration of this system includes 24 terminations.There is a base part number 74CBTLV3384 that can be used to locate signal switch's related components as well.The multiplexer's system is powered by 2.5V voltage.Signal switch has 24 component pins.A conductor terminates at GULL WING.There is a type of supply Single that is employed in this case.The board is configured with 24 pins.It is mounted in the way of Surface Mount.I would like to refer to the logic switch as a member of the CBTLV/3B family.As a result, signal multiplexer provides 10 bits.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V so as to avoid some unnecessary failures.Bus Driver/Transceivers is a category for the digital switch ics.Without the influence of external factors, it consumes 10μA current of multiplexer ic.The switches packaging is based on TR.This signal switching operates at a resistance of 2.7Ohm is the resistance at which it operates.In order to provide greater switches' flexibility, 64mA is provided as the output current.
SN74CBTLV3384DGVR Features
Supplied in the 24-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
SN74CBTLV3384DGVR Applications
There are a lot of Texas Instruments SN74CBTLV3384DGVR Signal Switches / Multiplexers / Decoders applications.
- Electronic circuits
- Make full adder
- Used to connect a single source to multiple destinations
- Image transmission
- Seven segment displays
- Analog, digital or video signal switching
- High-performance memory systems
- Code converters
- A/D converters
- Solenoid cooling fan
