Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
24 |
Weight |
89.499445mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CBTLV |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
7Ohm |
Subcategory |
Bus Driver/Transceiver |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2.3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.65mm |
Base Part Number |
74CBTLV3384 |
Pin Count |
24 |
Circuit |
5 x 1:1 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
3.6V |
Number of Ports |
2 |
Nominal Supply Current |
10μA |
Output Current |
64mA |
Number of Bits |
10 |
Throw Configuration |
SPST |
Propagation Delay |
250 ps |
Quiescent Current |
10μA |
Turn On Delay Time |
5.5 ns |
Family |
CBTLV/3B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
2 |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
1.2mm |
Length |
7.8mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBTLV3384PWR Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 24-TSSOP (0.173, 4.40mm Width).As a result, it is packaged in the way of Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.The analog IC used in the multiplexers can be referred to as Bus Switch.The operating temperature of -40°C~85°C will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 2.3V~3.6V supply voltage.Multiplexers from the 74CBTLV series can be used in a wide range of applications.It is designed with 24 terminations as part of its basic configuration.There is a base part number of 74CBTLV3384 which can also be used in order to locate the logic switch that are related to this item.The multiplexer is supplied with 2.5V voltage.This turn signal switch has a total of 24 component pins.Conductors terminate at GULL WING in this design.The supply type of this multiplexer ic is Single.Currently, it is configured with a 24 pin configuration.As you can see, it is mounted in the direction of Surface Mount.The logic switch belongs to the family of CBTLV/3B.Signal multiplexer contains 10 bits.Keeping Vsup at 3.6V will prevent some unnecessary failures.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceiver.In the absence of external influences, it consumes 10μA current of multiplexer ic.The switches package is packaged in accordance with TR.2 ports are used for some other peripheral signal switchings to plug in.The system operates with a resistance of 7Ohm.Higher switches' flexibility is provided by providing 64mA as the output current.
SN74CBTLV3384PWR Features
Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
SN74CBTLV3384PWR Applications
There are a lot of Texas Instruments SN74CBTLV3384PWR Signal Switches / Multiplexers / Decoders applications.
- A/D converters
- Small scale TV wall
- HD surveillance system
- Computer memory
- To select different devices in microprocessor input
- Microprocessor memory systems
- Data-routing applications
- Data bus control
- Data demultiplexing
- War field flying robot with a night vision flying camera