SN74CBTLV3857DBQR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Weight | 129.500622mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| Type | Bus Switch |
| Resistance | 8Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74CBTLV3857 |
| Pin Count | 24 |
| Operating Supply Voltage | 3.3V |
| Circuit | 10 x 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Ports | 2 |
| Nominal Supply Current | 25mA |
| Output Current | 24mA |
| Number of Bits | 10 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 25mA |
| Turn On Delay Time | 4.8 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| High Level Output Current | -48mA |
| Low Level Output Current | 48mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74CBTLV3857DBQR Overview
Digital switch is provided in the 24-SSOP (0.154, 3.90mm Width) for the purpose of saving board space.Tape & Reel (TR) is the method used for packaging.The mounting method digital switch ic uses is Surface Mount.the multiplexers uses IC Bus Switch as the analog IC.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility using digital controlled switch when it works with 3V~3.6V voltage.As a member of 74CBTLV series, the multiplexers can be used for a wide range of applications.There are 24 terminations included in its basic configuration.You can also find related parts by using its logic switch base part number of 74CBTLV3857.In this case, 3.3V is the voltage supplied to the multiplexer's system.A component pin count of 24 can be found on this turn signal switch.Conductors terminate at GULL WING in this design.There is a supply type of Single employed as part of this supply.Currently, it is configured with 24 pins.Surface Mount is the way it is mounted.The logic switch is a member of the CBTLV/3B family.In this signal multiplexer, there are 10 bits provided.The minimal supply voltage (Vsup) should be kept at 3V to avoid some unnecessary failures.Keeping Vsup at 3.6V will prevent some unnecessary failures.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.There are no external influences on this multiplexer ic, so it consumes 25mA current.If the supply voltage is set to 3.3V, reliable performance of the multiplexers can be achieved.The signal switching operates with a resistance of 2.A resistance of 8Ohm is used to operate the signal switching.It is possible to provide a current output of 24mA for greater switches' flexibility.
SN74CBTLV3857DBQR Features
Supplied in the 24-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
SN74CBTLV3857DBQR Applications
There are a lot of Texas Instruments SN74CBTLV3857DBQR Signal Switches / Multiplexers / Decoders applications.
- To select different devices in microprocessor output
- Injectors
- CNC machines
- Combinational circuit
- Memory chips
- Telephone network
- Enabling different rows of memory depending on address in memory chips
- A robotic vehicle with the metal detector
- RF-based home automation system
- HD surveillance system
