SN74CBTLV3857DGVR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 60.894776mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTLV |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | Bus Switch |
| Resistance | 8Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74CBTLV3857 |
| Pin Count | 24 |
| Operating Supply Voltage | 3.3V |
| Circuit | 10 x 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Ports | 2 |
| Nominal Supply Current | 250mA |
| Output Current | 24mA |
| Number of Bits | 10 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| High Level Output Current | 24mA |
| Low Level Output Current | 24mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTLV3857DGVR Overview
For the purpose of saving board space, digital switch is included in the 24-TFSOP (0.173, 4.40mm Width).It is packaged in the way of Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.For the analog part of the multiplexers, an IC Bus Switch is used.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.When operated with a 3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.The multiplexers from 74CBTLV series can be used for a wide range of applications.Its basic configuration includes terminations in the 24 range.There is a base part number of 74CBTLV3857 which can also be used in order to locate the logic switch that are related to this item.The turn signal switch is supplied with a voltage of 3.3V volts.This turn signal switch consists of 24 component pins.GULL WING represents the end of conductors.In this case, the supply type is Single.There are 24 pins on it.As you can see, it is mounted in the direction of Surface Mount.The logic switch is a member of the family of CBTLV/3B.The multiplexer ic provides 10 bits.Keeping the minimum supply voltage (Vsup) at 3V prevents some unnecessary failures.The maximal supply voltage (Vsup) should be kept at 3.6V to avoid some unnecessary failures.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.If the supply voltage is set to 3.3V, reliable performance of the multiplexers can be achieved.This signal switching operates at a resistance of 2.The resistance of the signal switching is 8Ohm.There is an output current of 24mA that allows for greater switches' flexibility.
SN74CBTLV3857DGVR Features
Supplied in the 24-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
SN74CBTLV3857DGVR Applications
There are a lot of Texas Instruments SN74CBTLV3857DGVR Signal Switches / Multiplexers / Decoders applications.
- Make half adder
- Memory chips
- Medical industry
- High-performance memory-decoding applications
- Data-routing applications
- Recording transmission
- Video transmission
- Speed synchronization of multiple motors in industries
- High-performance memory systems
- Implementing boolean functions with multiple variables
