SN74CBTLV3857DW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| Type | Bus Switch |
| Resistance | 8Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 74CBTLV3857 |
| Pin Count | 24 |
| Max Output Current | 64mA |
| Operating Supply Voltage | 3.3V |
| Circuit | 10 x 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Ports | 2 |
| Nominal Supply Current | 25mA |
| Output Current | 24mA |
| Number of Bits | 10 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 25mA |
| Turn On Delay Time | 4.8 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| High Level Output Current | -48mA |
| Low Level Output Current | 48mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTLV3857DW Overview
Due to the lack of space on the board, digital switch is provided in the 24-SOIC (0.295, 7.50mm Width).The package is packaged in the manner of Tube.Digital switch ic uses a Surface Mount mounting method.In the multiplexers, the analog IC Bus Switch is used.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.A supply voltage of 3V~3.6V provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 74CBTLV series, these multiplexers have a wide range of applications.Its basic configuration includes terminations in the 24 range.There is a base part number of 74CBTLV3857 which can also be used in order to locate the logic switch that are related to this item.In this case, 3.3V is the voltage supplied to the multiplexer's system.There are 24 component pins in this turn signal switch.It employs GULL WING as the point at which conductors come to an end.This supply type employs Single.The board is configured with 24 pins.It is positioned in the direction of Surface Mount.The logic switch is a member of the CBTLV/3B family.In this signal multiplexer, there are 10 bits that are provided.Keeping Vsup at 3V will prevent some unwanted failures.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.6V.Bus Driver/Transceivers is a category for the digital switch ics.No external influence consumes 25mA current of multiplexer ic.With a supply voltage of 3.3V, reliable performance of the multiplexers can be achieved.A resistance of 2 governs its operation.A resistance of 8Ohm is used to operate the signal switching.In order to provide greater switches' flexibility, 24mA is provided as the output current.
SN74CBTLV3857DW Features
Supplied in the 24-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
SN74CBTLV3857DW Applications
There are a lot of Texas Instruments SN74CBTLV3857DW Signal Switches / Multiplexers / Decoders applications.
- Robotic vehicles
- Textile mills
- To select different task for memory in microprocessor memory systems
- Steel plants
- Solenoid cooling fan
- LVDS
- Medium scale TV wall
- Transmission from the computer system of a satellite
- Medical industry
- High-performance memory-decoding applications
