SN74CBTLV3857DWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 8Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74CBTLV3857 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Circuit | 10 x 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Ports | 2 |
| Nominal Supply Current | 25mA |
| Output Current | 24mA |
| Number of Bits | 10 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 25mA |
| Turn On Delay Time | 4.8 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Prop. Delay@Nom-Sup | 0.25 ns |
| High Level Output Current | -48mA |
| Low Level Output Current | 48mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTLV3857DWR Overview
It is included in the 24-SOIC (0.295, 7.50mm Width) in order to save board space.Tape & Reel (TR) represents its packaging.Surface Mount is the mounting method digital switch ic uses.The analog IC used in the multiplexers can be referred to as Bus Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 3V~3.6V.provides digital controlled switch's digital controlled switch'sThese multiplexers are members of the 74CBTLV series, which provide extensive application potential.As part of its basic configuration, 24 terminations are designed as a part of it.The base part number is 74CBTLV3857, which is also useful when looking up signal switch's related components.The turn signal switch is supplied with a voltage of 3.3V volts.A component pin count of 24 can be found on this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply Single that is employed in this case.A total of 24 pins are configured on this board.It is positioned in the direction of Surface Mount.The logic switch is a member of the family of CBTLV/3B.The multiplexer ic provides 10 bits.Keeping the minimum supply voltage (Vsup) at 3V prevents some unnecessary failures.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.The part belongs to the Bus Driver/Transceivers category of signal switches.Not being affected by the external factors, consumes 25mA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 3.3V.A TR packaging method is used in the switches.The signal switching operates with a resistance of 2.It operates with a resistance of 8Ohm.For higher switches' flexibility, the output current is set to 24mA.
SN74CBTLV3857DWR Features
Supplied in the 24-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
SN74CBTLV3857DWR Applications
There are a lot of Texas Instruments SN74CBTLV3857DWR Signal Switches / Multiplexers / Decoders applications.
- RF-based home automation system
- Automation system
- D/A converters
- GLAN
- Code conversion
- Encrypted communications system
- Microprocessor input/output systems
- HD surveillance system
- Electronically controlled engine system
- Electronics industry
