SN74CBTLV3857PWR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | Bus Switch |
| Resistance | 8Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBTLV3857 |
| Pin Count | 24 |
| Operating Supply Voltage | 3.3V |
| Circuit | 10 x 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Ports | 2 |
| Nominal Supply Current | 25mA |
| Output Current | 24mA |
| Number of Bits | 10 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 25mA |
| Turn On Delay Time | 4.8 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| High Level Output Current | -48mA |
| Low Level Output Current | 48mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74CBTLV3857PWR Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 24-TSSOP (0.173, 4.40mm Width).The package is packaged in accordance with Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.When operated with a 3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 74CBTLV series, these multiplexers have a wide range of applications.As parts of its basic configuration, 24 terminations are desgined.The base part number is 74CBTLV3857, which can also be used to find its logic switch related parts.The turn signal switch is supplied with a voltage of 3.3V volts.In this turn signal switch, there are 24 component pins.GULL WING represents the end of conductors.Its supply type is Single, which is used as the source of power.Currently, it is configured with a 24 pin configuration.Surface Mount is the way it is mounted.The logic switch belongs to the family of CBTLV/3B.As a result, signal multiplexer provides 10 bits.To avoid unnecessary failures, keep the supply voltage at 3V (Vsup).Keeping Vsup at 3.6V will prevent some unnecessary failures.This is an the digital switch ic that is classified as Bus Driver/Transceivers.It consumes 25mA current of multiplexer ic without external influences.Using a supply voltage of 3.3V can result in reliable performance of the multiplexers.2 is the resistance at which it operates.A resistance of 8Ohm is used to operate it.For greater switches' flexibility, the output current of 24mA is provided.
SN74CBTLV3857PWR Features
Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
SN74CBTLV3857PWR Applications
There are a lot of Texas Instruments SN74CBTLV3857PWR Signal Switches / Multiplexers / Decoders applications.
- Night vision cameras
- HD surveillance system
- Solenoid cooling fan
- Electronic circuits
- RF-based home automation system
- Combinational circuit
- GLAN
- Enabling block of memory depending on address in memory chips
- Arithmetic Logic Units
- PCIe
