SN74CBTLV3861NSR

24 Terminations2.3V~3.6V 24 Pin 74CBTLV3861 Signal switch74CBTLV Series 1 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CBTLV3861NSR
Package: 24-SOIC (0.209, 5.30mm Width)
Datasheet: -
Stock: 183
Description: 24 Terminations2.3V~3.6V 24 Pin 74CBTLV3861 Signal switch74CBTLV Series 1 Functions(Kg)

Details

Tags

Parameters
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	24-SOIC (0.209, 5.30mm Width)
Number of Pins	24
Weight	307.790773mg
Operating Temperature	-40°C~85°C
Packaging	Cut Tape (CT)
Series	74CBTLV
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Discontinued
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	24
ECCN Code	EAR99
Type	Bus Switch
Resistance	40Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Bus Driver/Transceivers
Packing Method	TR
Technology	CMOS
Voltage - Supply	2.3V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.5V
Base Part Number	74CBTLV3861
Pin Count	24
Circuit	10 x 1:1
Polarity	Non-Inverting
Supply Voltage-Max (Vsup)	3.6V
Power Supplies	2.5/3.3V
Supply Voltage-Min (Vsup)	2.3V
Number of Ports	2
Nominal Supply Current	10μA
Output Current	64mA
Number of Bits	10
Throw Configuration	SPST
Propagation Delay	5.8 ns
Quiescent Current	10μA
Turn On Delay Time	5.8 ns
Family	CBTLV/3B
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	200MHz
Prop. Delay@Nom-Sup	0.25 ns
High Level Output Current	-128mA
Low Level Output Current	128mA
Voltage Supply Source	Single Supply
Independent Circuits	1
Count Direction	BIDIRECTIONAL
Translation	N/A
Height	2mm
Length	15mm
Width	5.3mm
Thickness	1.95mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74CBTLV3861NSR Overview

In order to conserve board space, digital switch is included in the 24-SOIC (0.209, 5.30mm Width).Cut Tape (CT) represents its packaging.The method digital switch ic adopts for mounting is Surface Mount.In the multiplexers, the analog IC Bus Switch is used.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When operated with a 2.3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Since they are members of the 74CBTLV series, they can be used in a wide variety of applications.There is a design for terminating 24 as part of its basic configuration.There is a base part number 74CBTLV3861 that can be used to locate signal switch's related components as well.In multiplexer's system, 2.5V is the voltage supplied.There are 24 component pins in this turn signal switch.As the end of conductors, it uses GULL WING.This supply type employs Single.A total of 24 pins are configured on this board.As you can see, it is mounted in the direction of Surface Mount.The CBTLV/3B family includes the logic switch.Signal multiplexer consists of 10 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2.3V.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.For mux switch's normal operation, power supply 2.5/3.3V is provided.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.Without any external influences, it consumes 10μA current of multiplexer ic at all times.The signal switching is packaged by TR. The system operates with a resistance of 2.With a resistance of 40Ohm, it operates.For greater switches' flexibility, 64mA provides the output current.