SN74CBTLV3861PW

24 Terminations2.3V~3.6V 24 Pin 74CBTLV3861 Signal switch74CBTLV Series 1 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CBTLV3861PW
Package: 24-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 205
Description: 24 Terminations2.3V~3.6V 24 Pin 74CBTLV3861 Signal switch74CBTLV Series 1 Functions(Kg)

Details

Tags

Parameters
High Level Output Current	-128mA
Low Level Output Current	128mA
Voltage Supply Source	Single Supply
Independent Circuits	1
Count Direction	BIDIRECTIONAL
Translation	N/A
Height	1.2mm
Length	7.8mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	24-TSSOP (0.173, 4.40mm Width)
Number of Pins	24
Weight	89.499445mg
Operating Temperature	-40°C~85°C
Packaging	Tube
Series	74CBTLV
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	24
Termination	SMD/SMT
Type	Bus Switch
Resistance	40Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Bus Driver/Transceivers
Technology	CMOS
Voltage - Supply	2.3V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.5V
Terminal Pitch	0.65mm
Base Part Number	74CBTLV3861
Pin Count	24
Circuit	10 x 1:1
Supply Voltage-Max (Vsup)	3.6V
Power Supplies	2.5/3.3V
Supply Voltage-Min (Vsup)	2.3V
Number of Ports	2
Nominal Supply Current	10μA
Output Current	64mA
Number of Bits	10
Propagation Delay	250 ps
Quiescent Current	10μA
Turn On Delay Time	5.8 ns
Family	CBTLV/3B
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	200MHz
Nominal Input Voltage	1.7V
Output Polarity	TRUE
Prop. Delay@Nom-Sup	0.25 ns

SN74CBTLV3861PW Overview

Due to the fact that it is provided in the 24-TSSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.Tube is the packaging method.As far as mounting is concerned, digital switch ic uses Surface Mount.For the analog part of the multiplexers, an IC Bus Switch is used.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.When operated with a 2.3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 74CBTLV series, these multiplexers have a wide range of applications.This configuration includes 24 terminations as part of its basic functionality.You can also find related parts by using its logic switch base part number of 74CBTLV3861.The multiplexer's system is supplied with a voltage of 2.5V.Currently, this turn signal switch has a total of 24 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply of Single.There are 24 pins on it.The mounting is in the way of Surface Mount.In the CBTLV/3B family, the logic switch is included.Signal multiplexer provides 10 bits.Keeping Vsup at 2.3V will prevent some unwanted failures.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.The power supply of 2.5/3.3V is provided for mux switch's normal operation.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.There are no external influences on this multiplexer ic, so it consumes 10μA current.This signal switching operates at a resistance of 2.A resistance of 40Ohm is used to operate it.In order to provide greater switches' flexibility, 64mA is provided as the output current.