SN74CBTLV3861PWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Resistance | 40Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Power Supplies | 2.5/3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Nominal Supply Current | 10μA |
| Current - Output | 64mA |
| Number of Bits | 10 |
| Propagation Delay | 250 ps |
| Quiescent Current | 10μA |
| Turn On Delay Time | 5.8 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Independent Circuits | 1 |
| Length | 7.8mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74CBTLV3861PWE4 Overview
In order to save board space, digital switch is located in the TSSOP.As parts of its basic configuration, 24 terminations are desgined.The voltage supplied for multiplexer's system is 2.5V.multiplexer's systemThis turn signal switch consists of 24 component pins.GULL WING represents the end of conductors.As a type of supply, Single is employed.This multiplexer ic has 24 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.In the CBTLV/3B family, the logic switch is included.Signal multiplexer consists of 10 bits.There is a power supply provided for the mux switch's normal operation of 2.5/3.3V.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.Without any external influences, it consumes 10μA current of multiplexer ic at all times.The system operates with a resistance of 2.It operates with a resistance of 40Ohm.The maximum temperature for this signal switch is 85°C.Ideally, the temperature of the multiplexer should not exceed -40°C.Device specifications specify 3.6V as the maximum supply voltage for the signal switches.A minimum supply voltage of 2.3V is specified for the digital swith in accordance with its applicable specifications.It uses IC BUS DRIVER for its logic.
SN74CBTLV3861PWE4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
BUS DRIVER as the logic IC
SN74CBTLV3861PWE4 Applications
There are a lot of Texas Instruments SN74CBTLV3861PWE4 Signal Switches / Multiplexers / Decoders applications.
- Enabling different functions units in microprocessor instruction decoding
- Recording transmission
- Enabling different rows of memory depending on address in memory chips
- Data collection system
- Electronic circuits
- Image transmission
- Memory chips
- Robotic vehicles
- Code conversion
- Microprocessor memory systems
