banner_page

SN74CBTLV3861PWG4

24 Terminations24 Pin Signal switch1 FunctionsMin 2.3V VMax 3.6V V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74CBTLV3861PWG4
  • Package: TSSOP
  • Datasheet: PDF
  • Stock: 354
  • Description: 24 Terminations24 Pin Signal switch1 FunctionsMin 2.3V VMax 3.6V V(Kg)

Details

Tags

Parameters
Supply Voltage 2.5V
Terminal Pitch 0.65mm
Pin Count 24
Power Supplies 2.5/3.3V
Temperature Grade INDUSTRIAL
Max Supply Voltage 3.6V
Min Supply Voltage 2.3V
Number of Ports 2
Nominal Supply Current 10μA
Current - Output 64mA
Number of Bits 10
Propagation Delay 250 ps
Quiescent Current 10μA
Turn On Delay Time 5.8 ns
Family CBTLV/3B
Output Characteristics 3-STATE
Supply Type Single
Bandwidth 200MHz
Output Polarity TRUE
Logic IC Type BUS DRIVER
High Level Output Current -128mA
Low Level Output Current 128mA
Independent Circuits 1
Height 1.15mm
Length 7.8mm
Width 4.4mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free
Mount Surface Mount
Package / Case TSSOP
Number of Pins 24
Weight 89.499445mg
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 24
Resistance 40Ohm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory Bus Driver/Transceivers
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1

SN74CBTLV3861PWG4 Overview


Due to the lack of space on the board, digital switch is provided in the TSSOP.There is a design for terminating 24 as part of its basic configuration.The multiplexer's system is supplied with a voltage of 2.5V.Signal switch has 24 component pins.As a result, conductors end at GULL WING.There is a type of supply Single that is employed in this case.Currently, it is configured with a 24 pin configuration.Surface Mount is the way it is mounted.The logic switch object belongs to the family of CBTLV/3B.Signal multiplexer contains 10 bits.mux switch's normal operation requires the power supply of 2.5/3.3V.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.It consumes 10μA current of multiplexer ic without external influences.The signal switching operates with a resistance of 2.As far as the resistance is concerned, it operates with 40Ohm.The maximum temperature for this signal switch is 85°C.In order to maintain a minimal operating temperature of the multiplexer, it should be set at -40°C.Upon compliance with the applicable device specifications, the device will operate at the maximum supply voltage of 3.6V.Typical device specifications specify a voltage supply of 2.3V for the digital swith.In terms of logic ICs, it uses BUS DRIVER.

SN74CBTLV3861PWG4 Features


Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
BUS DRIVER as the logic IC

SN74CBTLV3861PWG4 Applications


There are a lot of Texas Instruments SN74CBTLV3861PWG4 Signal Switches / Multiplexers / Decoders applications.

  • Data-routing applications
  • Speed control of medern motors
  • Video transmission
  • Memory chips
  • HDMI applications
  • Logic gates for other digital devices
  • Night vision cameras
  • Textile mills
  • PCIe
  • Metal detectors

Write a review

Note: HTML is not translated!
    Bad           Good