Parameters |
Number of Ports |
2 |
Nominal Supply Current |
10μA |
Output Current |
64mA |
Number of Bits |
10 |
Throw Configuration |
SPST |
Propagation Delay |
5.8 ns |
Quiescent Current |
10μA |
Turn On Delay Time |
5.8 ns |
Family |
CBTLV/3B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
Prop. Delay@Nom-Sup |
0.25 ns |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
1.2mm |
Length |
7.8mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
24 |
Weight |
89.499445mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CBTLV |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
40Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2.3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.65mm |
Base Part Number |
74CBTLV3861 |
Pin Count |
24 |
Circuit |
10 x 1:1 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
2.5/3.3V |
Supply Voltage-Min (Vsup) |
2.3V |
SN74CBTLV3861PWR Overview
Providing this information in the 24-TSSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.Tape & Reel (TR) is the packaging method.Surface Mount is the mounting method digital switch ic uses.The analog IC used in the multiplexers can be referred to as Bus Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.A supply voltage of 2.3V~3.6V provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 74CBTLV series, these multiplexers have a wide range of applications.As parts of its basic configuration, 24 terminations are desgined.As its base part number is 74CBTLV3861, logic switch can also be used to find its related parts.In multiplexer's system, 2.5V is the voltage supplied.Currently, this turn signal switch has a total of 24 component pins.As the end of conductors, it uses GULL WING.Single is employed as its supply type.Currently, it is configured with a 24 pin configuration.As you can see, it is mounted in the direction of Surface Mount.In the CBTLV/3B family, the logic switch is included.There are 10 bits signal multiplexer provides.Keeping the minimum supply voltage (Vsup) at 2.3V prevents some unnecessary failures.The maximal supply voltage (Vsup) should be kept at 3.6V to avoid some unnecessary failures.The power supply of 2.5/3.3V is provided for mux switch's normal operation.This is an the digital switch ic that is classified as Bus Driver/Transceivers.No external influence consumes 10μA current of multiplexer ic.According to TR, the switches is packaged.2 is the resistance at which it operates.A resistance of 40Ohm is used to operate it.For increased switches' flexibility, the output current of 64mA is provided.
SN74CBTLV3861PWR Features
Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
SN74CBTLV3861PWR Applications
There are a lot of Texas Instruments SN74CBTLV3861PWR Signal Switches / Multiplexers / Decoders applications.
- High-performance memory systems
- Data collection system
- Computer memory
- Time division multiplexing system
- D/A converters
- HDMI applications
- A/D converters
- Code converters
- Data bus control
- Combinational circuit